User manual SONY SCD-XB790

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, tablecloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquid, such as vases, on the apparatus. [. . . ] If the player cannot display the language used in a TEXT disc, "Other Lang" appears in the display. Turn l AMS L until the desired language appears in the display. After a few seconds, the information appears in the selected language. If you turn off the player or disconnect the mains lead, the player will store the last setting of repeat play ("Repeat All" or "Repeat 1") and recall it the next time you turn on the player. However, the setting of the Repeat A-B Play will be cancelled if you turn off the player or disconnect the mains lead. "REPEAT" appears in the display and Repeat All Play starts. The repeat play changes depending on the play mode you select. When the play mode is To cancel Repeat All Play Press REPEAT repeatedly until "REPEAT" goes off. When you select Shuffle Play, the player plays all the tracks on the disc in random order. While the track you want to repeat is being played, press REPEAT repeatedly until "REPEAT 1" appears in the display. To cancel Repeat 1 Play Press REPEAT repeatedly until "REPEAT 1" goes off. Repeating a specific portion within a track (Repeat A-B Play) You can specify one portion within a track to be played repeatedly. Note that the portion that you specify must be within the boundaries of a single track. While the player is playing, press AyB at the starting point (point A) of the portion to be played repeatedly. "REPEAT" appears and "A" flashes in the display. Continue playing the track (or press M) to locate the ending point (point B), then press AyB. ";" appears while the player is "shuffling" the tracks. The player will stop after playing all the tracks once. Z You can set a new starting point and ending point during Repeat A-B Play You can change the current ending point to a new starting point, then specify a new ending point to repeat another portion right after the current portion. The current ending point changes to the new starting point (point A). "REPEAT A-B" lights up and the player starts to repeat the newly specified portion. When you want to restart from the starting point A, press H during AyB repeat. [. . . ] â· Before playing, clean the disc with a cleaning cloth. Clean the disc with a soft cloth slightly moistened with water, and remove moisture with a dry cloth. â· Do not use solvents such as benzine, thinner, record cleaners, or anti-static spray. Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition, or the drive's characteristics. [. . . ]