User manual SONY SDM-S73/B

[. . . ] TFT LCD Color Computer Display SDM-S53 SDM-S73 SDM-S93 © 2003 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Model No. NOTICE This notice is applicable for USA/Canada only. [. . . ] For Macintosh Click [Utility] t [Mac]/[Mac Utility]. 2 Press the m/M buttons to select (COLOR) and press the OK button. The COLOR menu appears on the screen. 3 Press the m/M buttons to select the desired color temperature and press the OK button. Whites will change from a bluish hue to reddish hue as the temperature is lowered from 9300K to 6500K. 4 Press the MENU button. The main menu appears on the screen. 5 Press the m/M buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. x Fine tuning the color temperature (USER ADJUSTMENT) 1 Press the MENU button. The main menu appears on the screen. 6 Press the m/M buttons to select H CENTER or V CENTER and press the OK button. The H CENTER or V CENTER menu appears on the screen. 2 Press the m/M buttons to select 7 Press the m/M buttons to center the test pattern in the screen. (COLOR) and press the OK button. The COLOR menu appears on the screen. GB 8 Click [END] on the screen to turn off the test pattern. 9 Press the OK button. Return to the SCREEN menu. 3 Press the m/M buttons to select "ADJUST" and press the OK button. The fine tuning menu for color temperature appears on the screen. USER A D J U S T MENT 128 128 128 10 Press the m/M buttons to select button. Return to the menu screen. and press the OK R G B 1 2 8 0 x 1 0 2 4 / 6 0Hz EX I T 4 Press the m/M buttons to select R (Red) or B (Blue) and press the OK button. Then press the m/M buttons to adjust the color temperature and press the OK button. Since this adjustment changes the color temperature by increasing or decreasing the R and B components with respect to G (green), the G component is fixed. 5 Press the m/M buttons to select , then press the OK button. The new color setting is stored in memory for USER ADJUSTMENT and automatically recalled whenever USER is selected. The main menu appears on the screen. 13 Changing the gamma setting (GAMMA) You can associate the picture's color shade on the screen with the picture's original color shade. 0 Resetting the adjustment data to the defaults (RESET) Reset the adjustments to the default settings. 1 Press the MENU button. The main menu appears on the screen. 1 Press the MENU button. The main menu appears on the screen. 2 Press the m/M buttons to select 0 (RESET) and (GAMMA) and press the OK button. The RESET menu appears on the screen. 2 Press the m/M buttons to select press the OK button. The GAMMA menu appears on the screen. 3 Press the m/M buttons to select the desired mode and press the OK button. · OK: To reset all of the adjustment data to the default settings. Note that the (LANGUAGE) setting is not reset by this method. · CANCEL:To cancel resetting and return to the menu screen. 3 Press the m/M buttons to select the desired mode and press the OK button. Changing the menu's position (MENU POSITION) You can change the menu position if it is blocking an image on the screen. Locking the menus and controls (MENU LOCK) Lock the control of buttons to prevent accidental adjustments or resetting. 1 Press the MENU button. The main menu appears on the screen. 2 Press the m/M buttons to select (MENU POSITION) and press the OK button. The MENU POSITION menu appears on the screen. 1 Press the MENU button. The main menu appears on the screen. 3 Press the m/M buttons to select the desired position and press the OK button. You can choose one of 9 positions where the menu will appear. 2 Press the m/M buttons to select (MENU LOCK) and press the OK button. The MENU LOCK menu appears on the screen. 3 Press the m/M buttons to select ON or OFF and press the OK button. · ON: Only the 1 (power) switch will operate. [. . . ] Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e. g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. [. . . ]