User manual SONY SDM-P234

[. . . ] TFT LCD Color Computer Display SDM-P234 © 2004 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the unit. Record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. Serial No. NOTICE This notice is applicable for USA/Canada only. [. . . ] · Settings in the COLOR menu can be made for the current input. You can also adjust settings for other inputs. 9 1 Touch MENU. Touch m/M to select (COLOR) and touch OK. Touch m/M to select the desired color temperature and touch OK. Whites will change from a bluish hue (9300K) to a reddish hue (5000K) as the temperature is lowered. When you select "sRGB, " the colors adjust to the sRGB profile. (The sRGB color setting is an industry-standard color space protocol designed for computer products. ) If you select "sRGB, " the color settings of your computer must be set to the sRGB profile. 10 Touch m/M until the vertical stripes disappear. Adjust so that the vertical stripes disappear. 2 3 GB 11 Click [END] on the screen to turn off the test pattern. x Adjust the picture's position manually (H CENTER /V CENTER) If the picture is not in the center of the screen, adjust the picture's centering as follows. 1 2 3 Set the resolution to 1920 × 1200 on the computer. Start the CD-ROM, select the area and model, and display the test pattern. For Windows Click [Utility] t [Windows]/[Win Utility. exe]. For Macintosh Click [Utility] t [Mac]/[Mac Utility]. Touch m/M to select (SCREEN) and touch OK. Touch m/M to select "H CENTER" or "V CENTER" and touch OK. The "H CENTER" adjustment menu or "V CENTER" adjustment menu appears on the screen. Touch m/M to center the test pattern on the screen. Click [END] on the screen to turn off the test pattern. Note · If a connected computer or other equipment is not sRGB-compliant, color cannot be adjusted to the sRGB profile. · You cannot select "sRGB" when the ECO mode is set to "AUTO. " · If you select "sRGB, " you cannot adjust the contrast and brightness in the PICTURE ADJUST menu. Also, you cannot adjust the GAMMA menu. x Fine tuning the color temperature You can make additional adjustments to the light areas (GAIN:white level) and the dark areas (BIAS:black level) of a picture. Touch m/M to select (COLOR) and touch OK. Touch m/M to select "GAIN" and touch OK. The GAIN ADJUSTMENT menu appears on the screen. GAIN ADJUSTMENT 128 128 128 4 2 5 3 6 R G B 7 8 1 9 2 0 x 1 2 0 0 / 6 0Hz EX I T 15 4 Touch m/M to select R (Red), G (Green) or B (Blue) and touch OK. [. . . ] The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e. g. [. . . ]