User manual SONY SDX-400C

[. . . ] Make sure you read this manual before using the product. After reading this manual carefully, store it in a safe place. To use the N8551-34F Built-In AIT safely, operate the Built-In AIT in accordance with the instructions of this manual. The instruction manual explains which parts of the Built-In AIT are dangerous, the types of dangerous situations which may occur if you ignore the instructions, and how to avoid dangerous situations. [. . . ] (5) Please note that in no event shall NEC be liable for any damages whatever arising out of the use of this device, regardless of item (4) above. To maximize the N8551-34F Built-In AIT functions, please read the instruction manual carefully before use and fully understand how to handle the device. The instruction manual function as a guide that enables you to set up and use the N8551-34F BuiltIn AIT correctly. You can refer to this manual whenever you encounter a question or problem during setup and daily operation. The instruction manual consists of two chapters: the first covers the considerations on the safe use of the Built-In AIT (setup, daily operation and maintenance) and the second covers the considerations on the safe use of the AIT data cartridge available on the Built-In AIT (operation and maintenance). Order of priority when the N8551-34F Built-In AIT is used for the first time When the Built-In AIT is being used first time, refer to the instruction manual in the following sequence to perform the setup after unpacking the driver. For details on data storage methods and settings, such as data save format, refer to the instruction manual provided with the backup software. Three types of symbols are used in the manual. (For indications concerning safety, see the beginning of the manual. Indicates the points which must be observed when handling the Built-In AIT and the issues to which special attention must to be paid. Indicates the points which you should check when handling the Built-In AIT. Many accessories are included with the Built-In AIT in the N8551-34F Built-In AIT. Verify the packed contents with the part list given below and ensure that all the components and parts are present. also , check that each item is undamaged. If a component or part is missing or damaged, contact your dealer. Locking parts contained in the package or box will be required when removing the Built-In AIT for transportation. Copy a backup from the provided floppy disk. Keep the provided floppy disk as the master disk and use the backup disk in actual applications. Precautions during Use - Please read this Xii Order of priority when the N8551-34F Built-In AIT is used for the first time . This unit has the following features: · You can record large amounts of data on the AIT1 data cartridges using AIT (Advanced Intelligent Tape) format. ⷠWhen using the data compression function*1, you can record 35 to 70 GB of data on the AIT1 Data Cartridge. ⷠThe basic processing unit automatically determines whether data recorded on the AIT data cartridges is compressed. [. . . ] ⷠWhen the recording surface is contaminated with liquid, such as soft drink, coffee and tea, detergent, metal chips or cigarette ash. If you insert an AIT data cartridge in such a condition into the Built-In AIT, the read/write head or the driver itself may be damaged or contaminated, causing a machine failure. Also, if you insert a new AIT data cartridge into the Built-In AIT whose head is contaminated or scratched and you do not know about it, the AIT data cartridge may be contaminated or damaged. The service life of the AIT data cartridge varies greatly depending on temperature and humidity in the operating/storage environment, dust and dirt, and head abrasion condition. [. . . ]