Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SDX-D550V. We hope that this SONY SDX-D550V user guide will be useful to you.
Lastmanuals help download the user guide SONY SDX-D550V.
Detailed instructions for use are in the User's Guide.
[. . . ] The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to them whenever you call upon your dealer regarding this product. Information WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] The SDX-D450V must be marked with AIT-E Turbo, AIT-1 Turbo or AIT-1 logo. The SDX-D250V can be used with data cartridges marked with the AIT-E Turbo logo. Be sure to use only the cartridges designed specifically for AIT. ⷠDo not use anything but AIT cartridges with this system, as doing so can damage the AIT drive. Although commercially available 8 mm videotapes resemble AIT cartridges in appearance, they have entirely different specifications and cannot be used. Push to remove a data cartridge from the drive. After you confirm that you have all of the required accessories for your installation, connect the drive to the host computer, and select the SCSI ID with the rotary switch on the rear panel. When you first open the box, make sure it contains the following items. Contact your supplier if anything is missing or broken. Use a SCSI cable with a half pitch 68 pin connector. precautions · Switch off the host computer and peripherals before connecting the SCSI cable. ⷠMake sure the SCSI connectors are pressed tightly together. ⷠIf this unit is the last (or only) device on the Wide SCSI bus, make sure to connect a terminator to the appropriate unused Wide SCSI connector. Using an incompatible terminator may damage the unit. ⷠWith an Ultra Wide SCSI bus, the total length of the SCSI cable(s) connecting the host computer and the last device on the SCSI bus should be less than 12 meters (39 feet). (If a SCSI single-end host adapter is at the end of the SCSI bus, use less than 1. Press the + or buttons to move the number up or down, respectively. As shipped from the factory, the SCSI ID is set to 0. Press the switch buttons, if necessary, to select the SCSI ID number you require. Because the host adapter ID is usually set to 7, select some other value for the SCSI ID setting. precautions · The SCSI ID must be different from IDs of the other peripherals on the SCSI bus. ⷠWhen shipped from the factory, SCSI parity is enabled and Term power is ON. [. . . ] Please do not try to open it or take it apart. ⷠThe write-protect switch on the face of the cartridge prevents the tape from being written to or accidentally erased. If you do not need to write to the tape, move this switch to the write-protect position (in the direction of the arrow). Using your fingernail, push the switch in the direction of the arrow to protect the tape from writing or accidental erasure. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SDX-D550V
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SDX-D550V will begin.
