Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SDZ-S130. We hope that this SONY SDZ-S130 user guide will be useful to you.
Lastmanuals help download the user guide SONY SDZ-S130.
Detailed instructions for use are in the User's Guide.
[. . . ] The model and serial numbers are on a label on the bottom of the unit. Record the serial number in the space provided below. These numbers provide specific information about your S-AIT Tape Drive Unit and will be very helpful if you have to contact technical support. Your S-AIT Tape Drive Unit is assigned model number SDZ-S100 or SDZ-S130 for regulatory compliance certifications. [. . . ] This chapter describes how to turn the unit on and off, as well as how to insert and eject cartridges. Press the power switch on the front panel. The POWER indicator lights green and the unit starts. Then four status indicators change as follows as the unit is starting. â· All the indicators light green for about half a second. â· They then repeatedly flash yellow form left to right for about 3 seconds, indicating that the unit is performing a self-diagnostic. (If there is a cartridge in the unit, the TAPE MOTION indicator lights green or yellow. If the POWER indicator flashes when the unit starts, the cooling fan of the unit may be malfunctioning. if this is the case , verify that the cooling fan on the rear is operating normally. â· If the status indicators do not behave as described above, see chapter 1. â· Do not push down the front door when it is opened. If you start the host computer before the SDZ-S100, the SCSI ID is not detected correctly. Therefore, you must always start the SDZ-S100 before starting the host computer. â· If the S-AIT Tape Drive Unit does not behave as described above, see "Troubleshooting" on page 45. Press the power switch on the front panel. Do not turn off the S-AIT Tape Drive Unit when it is in use or there is a cartridge in the unit, as this could damage data. After turning off the S-AIT Tape Drive Unit, wait at least 10 seconds before turning it on again. Make sure that cartridges are not write-protected and prepare them for use. Press the power switch on the front panel. The POWER indicator lights green and the TAPE MOTION, DRIVE ERROR, TAPE ERROR and CLEANING REQUEST indicators flash as the unit performs a self-diagnostic. When the four indicators go out, insert your cartridge. If the indicators do not go out, see chapter 1 or try the troubleshooting procedures in the appendix to determine the problem. [. . . ] Cleaning -- Unplug the unit from the wall outlet before cleaning or polishing it. do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the unit. Object and Liquid Entry -- Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SDZ-S130
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SDZ-S130 will begin.
