User manual SONY SLV-675HF

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] Set the date, start and stop times, channel number and tape speed: 1 Press CURSOR / to flash each item in turn. To record the same program every day or the same day every week, press CURSOR . To enter another setting, move the cursor to the next line and repeat step 2. Daily/weekly recording In step 2 above, press CURSOR . N EVERY MO n EVERY SU n 1 month later n (dates count down) n the current date Tips · To set the channel, you can also use the CH+/­ or number buttons. ⷠTo set the tape speed, you can also use TAPE SPEED. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press POWER. the TIMER indicator turns off and the VCR switches on. Remember to press POWER to reset the VCR in timer recording standby after using the VCR. You can also do the following tasks while the VCR is recording: · To lock the VCR after setting the timer (Child Lock) Hold down POWER on the VCR until the VCR beeps. the VCR turns off and the H indicator appears in the display window. The VCR will not work except for timer recording. To unlock the VCR, hold down POWER on the VCR until the VCR beeps. The VCR turns on and the H indicator disappears from the display window. Playback options Fast-forward/rewind View the picture during fastforward or rewind Play at high speed Play in slow motion Play frame by frame Play in reverse Rewind and start play During fast-forward, keep pressing ) FF. Hold the button down to play one frame each second. Adjust the picture using the TRACKING +/­ buttons on the VCR if: ­ Streaks appear while playing in slow motion. ­ The picture shakes while pausing. notes · The sound is muted during these operations. ⷠTapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed. ⷠThe picture may have snow: ­ when playing at high speed in reverse ­ when playing in reverse slow motion ­ when playing in reverse. Recording TV programs using the quick timer After starting recording in the normal way, you can have the VCR stop recording automatically after a specified duration. [. . . ] Make sure the tape isn't at its end. make sure a program has been set for timer recording. Make sure your timer settings have not already passed the current time. ⷠCheck that the cable box is turned on. [. . . ]