User manual SONY SLV-760HF

[. . . ] The model number is located at the rear of the unit and the serial number on the top. record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] EP provides recording time three times as long as SP, however, SP produces better picture quality. To watch another TV program while recording 1 Press TV/VTR to turn off the VTR indicator in the display window. If the TV is connected to the VCR's LINE OUT jacks, set the TV to TV input; if not, skip this step. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. safety tab Tips · To select a channel, you can use the number buttons on the remote commander. Enter the channel number, then press ENTER. ⷠTo cut out an unwanted scene while recording, press P PAUSE and turn the DUAL MODE SHUTTLE ring on the VCR to rewind the tape to the beginning of the unwanted scene, then press P PAUSE to resume recording. ⷠThe display appears on the TV screen indicating information about the tape, but the information won't be recorded on the tape. ⷠIf you don't want to watch TV while recording, you can turn off the TV. When using a cable box, make sure to leave it on. notes · The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-30, or tapes recorded in the LP mode. ⷠThe display does not appear during still (pause) mode or slow-motion playback. ⷠIt may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. The date, times and channel number of that program are set automatically. You can preset up to eight programs at a time. Turn on your TV and set it to the video channel. ⷠInsert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. Press the number buttons to enter the program's PlusCode. If you make a mistake, press TIMER CLEAR and re-enter the correct number. To record Only once Everyday Monday to Friday Press ONCE DAILY WEEKLY The date, start and stop times, channel number and tape speed appear on the TV screen. [. . . ] ⷠWhen not recording SAP sound, make sure the NORMAL AUDIO option in the ADVANCED OPTIONS menu is set to MAIN. Check that the safety tab has not been removed. make sure a program has been set for timer recording. Make sure your timer settings have not passed the current time. [. . . ]