User manual SONY SLV-D900E

[. . . ] The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. installing · Do not install the unit in a confined space such as a bookshelf or similar unit. Do not install the unit in an inclined position. Keep the unit and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers. [. . . ] The PROGRESSIVE indicator lights up in orange when the DVD player outputs progressive signals. The connection using COMPONENT VIDEO OUT jack is only for the DVD player. Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of progressive scan picture problems, it is recommended that you switch the connection to the standard definition output. If there are questions regarding your Sony TV set's compatibility with this DVD player, please contact our customer service center. "Audio Setup" allows you to set the sound according to the playback and connection conditions. Press SET UP when the DVD player is in stop mode, then press V/v to select (DVD) and press ENTER. D-PCM Dolby Digital Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. PCM Select this when the player is connected to an audio component lacking a built-in MPEG decoder. If you play MPEG audio sound tracks, the player outputs stereo signals via the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack. Select this when the player is connected to a TV lacking S-VIDEO input jack. DVD Component Out Selects whether or not to output DVD Component Out signals from the DVD Component Out jack on the rear panel of the player. Playback settings stored in the disc take priority over the "DVD SETUP" menu settings and not all the functions described may work. Depending on the DVD VIDEO, "4:3 Letter Box" may be selected automatically instead of "4:3 Pan Scan" or vice versa. The connection using S-VIDEO OUT jack is only for the DVD player. When you select "On" in the "DVD LINE1 RGB Out" setting, "DVD S-Video Out" and "DVD Component Out" are set to "Off" automatically. When you select "On" in the "DVD LINE1 RGB Out" setting, "DVD S-Video Out" and "DVD Component Out" signals will not be output properly. When you select "On" in the "Progressive" setting, "DVD LINE1 RGB Out" and "DVD SVideo Out" are set to "Off" automatically. If your TV accepts progressive (525P/625P) format signals, you will enjoy accurate color reproduction and high quality image. 1 Ensure your TV is (525P/625P) Progressive Scan 2 Connect with Component Video Output jacks (red/green/blue connections). See "Use this hookup if your TV has component video input jacks" on page 56. [. . . ] When the input signal contains a surround component, the Pro Logic process outputs the front, centre and rear signals. The rear channel is stereo and there is a discrete subwoofer channel in this format. Good channel separation is realized because all of the channel data is recorded discretely and little deterioration is realized because all channel data processing is digital. DVD (page 6) A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a CD. [. . . ]