User manual SONY SLV-D900G

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains lead must only be changed at a qualified service shop. Check that the unit's operating voltage is identical with your local power supply. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a subwoofer. B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio or DTS* decoder, a digital input jack and 6 speakers This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player. You must make connections using B-1 and B-2 . After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital" and "DTS" to "On" in "Audio Setup" (page 52). if your AV amplifier (receiver) has an MPEG audio decoder function , set "MPEG" to "MPEG" (page 52). Otherwise, no sound or a loud noise will come from the speakers. Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO hookup. Use this hookup if your TV has an S VIDEO input jack · connect an S VIDEO cord (not supplied). Set "DVD Video Out" to "S-Video" in the "SCREEN SETUP" menu (page 55) to view pictures from the S VIDEO jack. The connection using S VIDEO OUT jack is only for the DVD player. "Audio Setup" allows you to set the sound according to the playback and connection conditions. Press SET UP when the DVD player is in stop mode. D-PCM Dolby Digital Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. DTS Selects whether or not to output DTS signals. the default setting is indicated in bold print. Off On Select this when the player is connected to an audio component lacking a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder. Audio DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC. " This affects the output from the following jacks: ­ LINE OUT AUDIO L/R jacks ­ DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby Digital" is set to "D-PCM. Makes the low sounds clear even if you turn the volume down. [. . . ] To record on this tape, cover the tab hole. Check that the safety tab has not been removed. make sure a programme has been set for timer recording. Make sure your timer settings are past the current time. [. . . ]