User manual SONY SLV-D910R

[. . . ] The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. installing · Do not install the unit in an inclined position. Keep the unit and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers. Do not place heavy objects on the unit. [. . . ] Switch the input selector on your TV so that the signal from the player appears on the TV screen. To record from a satellite or digital tuner, turn it on. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. If the DVD player is in play mode, you cannot display the "SETUP MENU. Press SET UP when the DVD player is in stop mode. If you want to change a setting, go on to the next step. If you do not need to change the settings, press O RETURN repeatedly to exit the menu. If any settings remain, turn off the VCR to return to recording standby. When the timer settings overlap The programme that starts first has priority and the second programme starts recording only after the first programme has finished. if the programmes start at the same time , the programme listed first in the menu has priority. Makes the low sounds clear even if you turn the volume down. PCM Select this when the player is connected to an audio component lacking a built-in MPEG decoder. If you play MPEG audio sound tracks, the player outputs stereo signals via the DIGITAL OUT (OPTICAL or COAXIAL) jack. Select this when the player is connected to an audio component with a built-in MPEG decoder. If you select the surround setting while playing a DVD, the player does not output the following signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack. Dolby Digital signals (when you set "Dolby Digital" in "AUDIO SETUP" to "D-PCM") ­ MPEG audio signals · If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. "Screen Setup" allows you to set the screen according to the playback and connection conditions. Press SET UP when the DVD player is in stop mode. 4:3 Letter Box 4:3 Pan Scan Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. Select this when you connect a 4:3 screen TV. [. . . ] Existing broadcasts may interfere with the VCR. Select the correct source with the INPUT SELECT button. Select a programme position when recording TV programmes; select a line input when recording from other equipment. To record on this tape, cover the tab hole. [. . . ]