User manual SONY SLV-D950GI

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains lead must only be changed at a qualified service shop. Check that the unit's operating voltage is identical with your local power supply. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital" and "DTS" to "On" in "AUDIO SETUP" menu (page 57). if your AV amplifier (receiver) has an MPEG audio decoder function , set "MPEG" to "MPEG" in "AUDIO SETUP" menu (page 57). Otherwise, no sound or a loud noise will come from the speakers. Make audio connections using the OUT AUDIO L/R jacks or DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jacks when you use S-VIDEO hookup. Use this hookup if your TV has an S VIDEO input jack · connect an S VIDEO cord (not supplied). Set "DVD S-Video Out" to "On" in the "SCREEN SETUP" menu (page 60) to view pictures from the S-VIDEO jack. The connection using S-VIDEO OUT jack is only for the DVD player. "Audio Setup" allows you to set the sound according to the playback and connection conditions. Press SET UP when the DVD player is in stop mode, then press V/v to select (DVD) and press ENTER. D-PCM Dolby Digital Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder. Select this when the player is connected to an audio component with a built-in Dolby Digital decoder. PCM Select this when the player is connected to an audio component lacking a built-in MPEG decoder. If you play MPEG audio sound tracks, the player outputs stereo signals via the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack. Select this when the player is connected to an audio component with a built-in MPEG decoder. DTS Selects whether or not to output DTS signals. the default setting is indicated in bold print. Off On Select this when the player is connected to an audio component lacking a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder. Audio DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC". This affects the output from the following jacks: ­ OUT AUDIO L/R jacks ­ DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby Digital" is set to "D-PCM". Makes the low sounds clear even if you turn the volume down. All types of signals including 96 kHz/24 bit are output in their original format. [. . . ] The rear channel is stereo and there is a discrete subwoofer channel in this format. Good channel separation is realized because all of the channel data are recorded discretely and little deterioration is realized because all channel data processing is digital. dolby Surround (Pro Logic) (page 54) Audio signal processing technology that Dolby Laboratories developed for surround sound. When the input signal contains a surround component, the Pro Logic process outputs the front, centre and rear signals. [. . . ]