User manual SONY SLV-D970PR

[. . . ] Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. To Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape Press x STOP X PAUSE X PAUSE or H PLAY M FF during stop m REW during stop Z EJECT To use the time counter Press CLEAR at the point on the tape that you want to find later. The counter stops counting when it comes to a portion with no recording. ⷠDepending on your TV, the following may occur while playing an NTSC-recorded tape: ­ The picture becomes black and white. While setting the menu on the TV screen, buttons for playback on the remote commander do not function. Turn on your TV and set it to the video channel. Insert a tape with its safety tab in place. However, SP (Standard Play) produces better picture and audio quality. Each time you press COUNTER/REMAIN, the time counter and the remaining time appear alternately. In order to get an accurate remaining time indication, be sure TAPE SELECT in the USER SET menu is set according to the tape type you use (see page 44). To watch another TV programme while recording To save a recording To prevent accidental erasure, break off the safety tab as illustrated. If "­ ­" appears in the "PR" (programme) column (this may M E NU happen for local broadcasts), you have to set the appropriate programme position manually. press M/m to select the desired programme position. To record from another source connected to the input connector, press INPUT SELECT to display the connected line in the "PR" position. You will only have to do this operation once for the referred channel. if the information is incorrect , press CLEAR to cancel the setting. If you want to change the date, tape speed, and the VPS/PDC setting: To record the same programme ­­ ­­­­ ­­ :­­ ­­ :­­­ ­ S E L E CT : SET : every day or the same day every E ND : OK E X I T : M E NU week, see "Daily/weekly recording" on page 34. For details about the VPS/PDC function, see "Timer recording with VPS/PDC signals" on page 34. ⷠTo use the Auto Tape Speed function, press m to display "AUTO" in the blank positions next to the "V/P" row. To record from another source, leave the connected equipment switched on. Daily/weekly recording In step 4 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. [. . . ] To record on this tape, cover the tab hole (see page 30). To record on this tape, cover the tab hole (see page 30). The tape starts playing as soon as it is inserted. the tape is ejected when you press z REC. [. . . ]