User manual SONY SLV-D980PGI

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains lead must only be changed at a qualified service shop. Check that the unit's operating voltage is identical with your local power supply. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] If you play MPEG audio sound tracks, the player outputs stereo signals via the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack. Select this when the player is connected to an audio component with a built-in MPEG decoder. DTS Selects whether or not to output DTS signals. the default setting is indicated in bold print. Off On Select this when the player is connected to an audio component lacking a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder. Audio DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC. " This affects the output from the following jacks: ­ OUT AUDIO L/R jacks ­ DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby Digital" is set to "D-PCM. Gives you the feeling of being at alive performance. If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. If you set "DTS" to "On, " you cannot select surround setting (page 81). You cannot perform DTS audio output during playback quickly or slowly with sound (page 31). "Screen Setup" allows you to set the screen according to the playback and connection conditions. Press SET UP when the DVD player is in stop mode, then press V/v to select (DVD) and press ENTER. 4:3 Letter Box 4:3 Pan Scan Select this when you connect a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Select this when you connect a wide-screen TV or a TV with a wide mode function. Off On Select this not to output RGB signals. DVD S-Video Out Selects whether or not to output S-video signals from the S-VIDEO OUT jack on the rear panel of the player. the default setting is indicated in bold print. [. . . ] the data capacity of a single-layer and single-sided DVD is 4. 7 GB (Giga Byte), which is 7 times that of a CD. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. [. . . ]