User manual SONY SLV-E735B

[. . . ] If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Do not install the unit in an inclined position. [. . . ] For identification, you can enter a personal code into the VCR. Once you enter your personal code, you can confirm it any time but can never change it. Hold down P PAUSE and ON/STANDBY on the VCR simultaneously for more than three seconds. Each time you press > , the character changes as shown below. // until the character you want to correct flashes, then reset it. You can set up to 11 characters for your personal code. If the displayed personal code is wrong, press CLEAR and continue from step 2. To confirm you personal ID While the VCR is turned off and there is no tape in the VCR, hold down P PAUSE and ON/STANDBY on the VCR simultaneously for more than three seconds. the entered personal code appears on the TV screen. To correctly check the remaining time of the tape, set TAPE SELECT in the TAPE OPTIONS menu according to the tape type you use (see page 52). To watch another TV programme while recording Press TV/VIDEO to turn off the VIDEO indicator in the display window. If you want to change the date, tape speed, and the VPS/PDC function setting: To record the same programme every day or the same day every week, see "Daily/weekly recording" on page 39. Daily/weekly recording In step 3 above, press . N MO (every Monday) n SU (every Sunday) n 1 month later n (dates count down) n TODAY Timer recording with VPS/PDC signals The broadcast systems transmit VPS (Video Programme System) or PDC (Programme Delivery Control) signals with their TV programmes. These signals ensure that your timer recordings are made regardless of broadcast delay, early starts or broadcast interruptions. to use the VPS/PDC function , set VPS/PDC to ON. You can also use the VPS/PDC function for a source connected to the LINE-1(TV), LINE-3 IN connectors, and LINE-2 IN jacks. To record satellite broadcasts If you connect the satellite tuner and the VCR, you can record satellite programmes. On the satellite tuner, select the satellite programme for which you want to make a timer setting. Keep the satellite tuner turned on until the VCR finishes recording the satellite programme for which you have made a timer setting. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ON/STANDBY. the indicator turns off and the VCR switches on. [. . . ] Turn the power off, unplug the mains lead and leave the VCR to dry for over one hour. The clock stops if the VCR is disconnected from the mains for more than an hour. If you are using a monitor, set it to video input. If the VCR is connected to the TV only with the aerial cable, make sure that RF MODULATOR in the OPTIONS menu is set to ON. [. . . ]