User manual SONY SLV-ED10PS

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. Caution Television programmes, films, video tapes and other materials may be copyrighted. unauthorized recording of such material may be contrary to the provisions of the copyright laws. [. . . ] ⷠDo not press TRINITRON TV SYNCHRO PLAY while playing back a video tape. Turn on your TV and set it to the video channel. Insert a tape with its safety tab in place. LP (Long Play) provides recording time twice as long as SP (Standard Play), however, SP produces better picture and audio quality. To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. To record NTSC colour system programmes NTSC colour signals can be recorded through the line input (LINE IN) only. Display "L" in the display window using INPUT SELECT or PROG +/­ in step 3. For tape speed, select SP or EP in step 4. EP provides recording time three times as long as SP, however, SP produces better picture and sound quality. When playing back, the VCR automatically detects the tape speed. You can select a video source from the LINE IN jack using INPUT SELECT or PROG +/­. When you use PROG +/­, "L" in the display window appears between the lowest programme position and the highest one. ⷠThe display appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. To set the timer and clock setting using the remote commander You can also use the remote commander to set the easy timer and easy clock. the operations on the VCR and the remote commander correspond as follows: To Confirm the setting and go to the next setting Change the time by 15 minutes (in START/STOP mode) Change the time by one minute (in START/STOP mode) Select the programme Do this on the VCR Do this on the remote commander Press EASY TIMER knob Press EASY TIMER Turn EASY TIMER knob or hold PROGRAM +/­ down Press PROGRAM +/­ Hold PROG +/­ down To check or change the timer setting Press EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then re-enter the new setting, if necessary. If you do not want to change any of the settings, press the EASY TIMER knob repeatedly until the t indicator appears in the display window. You can also change the timer setting using the TIMER SET/CHECK menu. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ON/STANDBY. [. . . ] Consult your local Sony service facility for more information. Playback The picture rolls vertically during picture search. If you are using a monitor, set it to video input. Make sure SYSTEM (B/G, D/K or I) in the TUNER PRESET menu is set to the system in your area. [. . . ]