User manual SONY SLV-ED343SG

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. The mains lead must only be changed at a qualified service shop. Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers. [. . . ] Turn and press EASY TIMER to set the month, and then the year. After you set the year, "CLOCK" appears in the display window. Turn and press EASY TIMER to set the hour and minute. When you have finished setting the time, press EASY TIMER to start the clock. To cancel a Easy Timer setting, press x STOP on the VCR while you are making the setting. To record NTSC signals in EP mode, set the tape speed to LP. Even when timer recording is set to LP mode, NTSC signals are automatically recorded in EP mode. notes · If eight programmes have already been set using the TIMER PROGRAMMING menu, "FULL" appears in the display window for about five seconds. Indicators flash in the display window when you complete the · The and setting in step 11 with no tape inserted. When the time is set incorrectly, "ERROR" appears in the display window in step 11. The Easy Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Easy Timer. It cancels the "FULL" notice which appears if eight programmes have already been set. Do not use the Demonstration Mode for making timer recordings. Doing so may cause the settings to be inaccurate. to activate the Demonstration Mode Press X PAUSE on the VCR while turning the EASY TIMER. "DEMO" appears in the display window for a few seconds. to cancel the Demonstration Mode Turn the power off and unplug the mains lead. Although the Demonstration Mode is cancelled, the timer settings entered while using the Demonstration Mode will remain. Be sure to manually cancel the timer settings before you use the Easy Timer or any other timer method after reconnecting the mains lead (see page 48). You can preset a total of eight programmes, including settings made with the Easy Timer (SLV-ED949ME/SG only). Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. [. . . ] Select the correct source with the INPUT SELECT button. Select a programme position when recording TV programmes; select a line input when recording from other equipment. Make sure the TV system is correctly set for your TV. Make sure TV SYSTEM (B/G, D/K or I) in the INSTALLATION menu is set to the same system in your local area. [. . . ]