User manual SONY SLV-EZ77AS

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. The mains lead must only be changed at a qualified service shop. Caution Television programmes, films, video tapes and other materials may be copyrighted. unauthorized recording of such material may be contrary to the provisions of the copyright laws. [. . . ] To check or change the timer setting Press the EASY TIMER knob repeatedly until the setting you want to check or change flashes. Then re-enter the new setting, if necessary. If you do not want to change any of the settings, press the EASY TIMER knob repeatedly until the t indicator appears in the display window. You can also change the timer setting using the TIMER SET/CHECK menu. To cancel the timer setting To cancel the Easy Timer setting while doing the setting, press CLEAR on the remote commander or press PROGRAM + and ­ on the VCR at the same time. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?You can also do the following tasks while the VCR is recording: · To watch the recorded programme right after the Easy Timer recording The SEARCH indicator starts flashing when the VCR finishes the Easy Timer recording. to watch the recorded programme , press the EASY TIMER knob. The VCR turns on, starts searching, then automatically starts playback from the beginning of the recording. To record from a source connected to LINE-1 IN (SLV-EZ77AS/EZ77NZ: SAT IN/ STB IN) or LINE-2 IN (or LINE-3 IN: SLV-EZ77AS/EZ77NZ only) jacks, press INPUT SELECT or PROG +/­ or turn the EASY TIMER knob to display "L1" or "L2" (or "L3": SLV-EZ77AS/EZ77NZ only) in the display window. ⷠ(For SLV-EZ77AS/EZ77NZ only) To record NTSC signals, set the tape speed to SP or EP. You cannot set the Easy Timer if eight programmes have already been set. ⷠYou can set the timer for only one programme using the Easy Timer function. If you want to set the timer for other programmes, use the G-CODE system or the TIMER SET/CHECK menu. You cannot set the date using the Easy Timer function. Set the date using the CLOCK SET menu if you want to set the timer with the menu. The t indicator flashes in the display window when you complete the setting with no tape inserted. Just enter the G-CODE number, listed in the TV programme guide, for the programme you want to record. The date, times and programme position of that programme are set automatically. You can preset up to eight programmes at a time. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. [. . . ] The clock stops if the VCR is disconnected from the mains for more than eight hours. The tape starts playing as soon as it is inserted. the tape is ejected when you press z REC. The SYNCHRO REC button turns off while recording or does not go back to recording standby mode. [. . . ]