User manual SONY SLV-SE220D

[. . . ] Press MENU, then press M/m to move the cursor (B) to TUNER PRESET and press OK. Press M/m/</, to move the cursor (B) to SYSTEM, then select B/G, D/K or I, whichever is applicable in your area. If SYSTEM is set to the wrong position, the sound will be distorted or noisy. Press M/m/</, to move the cursor (B) to NORMAL/CATV, then select NORM. [. . . ] Set the recording timer to record only one programme that will be broadcast within the next 24 hours using the EASY TIMER knob. If the VCR clock has not been set, you can also set the clock before setting the timer recording. Insert a tape with its safety tab in place. Make sure the tape is longer than the recording time. Set the recording stop time in the same way as in step 2, then push the EASY TIMER knob. Turn the EASY TIMER knob clockwise or counterclockwise to select the programme you want to record. When "­:­ ­" is displayed in the display window, the VCR clock has not been set. You need to set the clock using the Easy Clock function before setting the timer. You can also change the current time using the Easy Clock function. When "­:­ ­" is displayed in the display window, push EASY TIMER. ⷠTo change the clock setting, push and hold the EASY TIMER knob on the VCR for more than three seconds. You cannot set the date using the Easy Timer function. Set the date using the CLOCK SET menu if you want to set the timer with the menu. The t indicator flashes in the display window when you complete the setting with no tape inserted. You can preset up to eight programmes at a time. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. ⷠTurn on your TV and set it to the video channel. Set the date, start and stop times, programme position, and tape speed: 1 Press , to select each item in turn. To correct a setting, press < to return to that setting and reset it. To record the same programme every day or the same day every week, press m while the date is flashing. To enter another setting, move the cursor to the next line and repeat step 2. [. . . ] notes · Make sure you connect the plugs to the jacks of the same colour. ⷠIf you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise. Turn on your TV and set it to the video channel. Insert a source tape with its safety tab removed into the other (playback) VCR. [. . . ]