User manual SONY SLV-SE410K

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains lead must only be changed at a qualified service shop. Compatible colour systems This VCR is designed to record using the PAL (B/G or D/K) or MESECAM (B/G or D/K) colour system and play back using the PAL (B/G or D/K) or MESECAM (B/G or D/K) colour systems. Recording of video sources based on other colour systems cannot be guaranteed. [. . . ] Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. â· To record from a decoder, turn it on. â· Turn on your TV and set it to the video channel. Press the programme number buttons to enter the ShowView number. If you make a mistake, press CLEAR and re-enter the correct number. The date, start and stop times, programme position or station name, tape speed, and VPS/PDC setting appear on the TV screen. " CANCEL : CLEAR EXIT : MENU (programme) column (this may happen for local broadcasts), you have to set the appropriate programme position manually. press M/m to select the desired programme position. To record from a decoder or other source connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the "PROG. You will only have to do this operation once for the referred channel. If you want to change the date, tape speed, and the VPS/PDC setting: 1 Press </, to highlight the item you want to change. To record the same programme every day or the same day every week, see "Daily/weekly recording" on page 55. To record from a decoder or other source, leave the connected equipment switched on. T MON (every Monday) t SUN (every Sunday) t 1 month later t (dates count down) t TOMORROW t TODAY Daily/weekly recording In step 4 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. Timer recording with VPS/PDC signals Some broadcast systems transmit VPS (Video Programme System) or PDC (Programme Delivery Control) signals with their TV programmes. These signals ensure that your timer recordings are made regardless of broadcast delays, early starts, or broadcast interruptions (when the VPS or PDC indicator in the display window is lit). To use the VPS/PDC function, set VPS/PDC to ON in step 4 above. You can also use the VPS/PDC function for a source connected to one or more of the LINE inputs. To record satellite broadcasts If you connect a satellite tuner and the VCR, you can record satellite programmes. 3 satellite tuner finishes recording 4 Keep theprogramme for turned on until the VCR timer setting. [. . . ] â· There was a power failure. Make sure you are pointing the remote commander at the remote sensor on the VCR. â· Replace all the batteries in the remote commander with new ones if they are weak. Others The remote commander does not function. [. . . ]