User manual SONY SLV-SE620E

[. . . ] Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner. compatible colour/TV systems · This VCR is designed to record and play back using the PAL (B/G, D/K and I), MESECAM (B/G and D/K) and NTSC colour systems. Recording of video sources based on other colour systems cannot be guaranteed. ⷠNTSC colour signals can only be recorded through the line input. [. . . ] ­ Replace both of the batteries with new ones, and press the button again. Note that this function may not operate some Sony TVs because of the remote commander's signal limitations. ⷠDo not press TRINITRON TV SYNCHRO PLAY while playing back a video tape. Turn on your TV and set it to the video channel. Insert a tape with its safety tab in place. LP (Long Play) provides recording time twice as long as SP (Standard Play), however, SP produces better picture and audio quality. To watch another TV programme while recording 1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step. To save a recording To prevent accidental erasure, break off the safety tab as illustrated. To record on a tape again, cover the tab hole with adhesive tape. To record NTSC colour system programmes NTSC colour signals can be recorded on this VCR from the LINE-1 IN, LINE-2 IN and LINE-3 IN (SAT IN) jacks only. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ON/STANDBY. the t indicator turns off and the VCR switches on. Remember to press ON/STANDBY to reset the VCR after using the VCR. You can also do the following tasks while the VCR is recording: · To record from a source connected to LINE-1 IN, LINE-2 IN or LINE-3 IN (SAT IN) jacks, press INPUT SELECT or PROG +/­ or turn the EASY TIMER knob to display "L1", "L2" or "L3" in the display window. ⷠTo record NTSC signals, set the tape speed to SP or EP. To cancel the easy timer setting, press CLEAR on the remote commander or press PROGRAM + and ­ on the VCR at the same time during any of the easy timer setting. notes · You cannot set the easy timer if eight programmes have already been set. ⷠYou can set the timer for only one programme using the easy timer. If you want to set the timer for other programmes, use the TIMER SET/CHECK menu. You cannot set the date using the easy timer. Set the date using the CLOCK SET menu if you want to set the timer with the menu. [. . . ] Clean the video heads using the Sony T-25CLD, T-25CLW or E-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). Do not use a commercially available liquid type cleaning cassette other than Sony's, as they may damage the video heads. Consult your local Sony service facility for more information. [. . . ]