User manual SONY SLV-SF990G

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Mains lead must only be changed at a qualified service shop. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. If the 13A fitted plug does not match the outlet socket in your home, please refer to your Appointed Sony Dealer for advice. [. . . ] The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. You cannot display the current tape time in the display window when setting the recording duration. You can set the VCR to automatically record programmes from equipment such as a programmable Set Top Box by connecting the equipment to the LINE-4 IN connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from LINE-4 IN. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. On the STB to the time of the programme you want to record, then turn it Down SYNCHRO REC for more than seconds. 3 HoldSYNCHRO REC indicator lights up ontwo front panel and the VCR stands The the by for recording. The VCR automatically turns on and starts recording when it receives an input signal from the STB. The VCR automatically stops recording when the tape reaches the end or when the STB stops transmitting an input signal. This function may not work with some types of Set-Top Boxes. â· If the settings for timer recording and Synchronized Recording overlap, the proramme that starts first has priority and the second programmme starts recording only after the first programme has finished. â· The Auto Clock Set function does not work while the VCR stands by for Synchronized Recording. Turn on your TV and set it to the video channel. If you want to change or cancel a setting, go on to the next step. â· If you do not need to change or cancel the settings, press MENU, then turn off the VCR to return to recording standby. CURSOR M/m to select 4 Press to change or cancel, then the setting you want press OK. Remain, turn off the VCR to return to recording standby. if any settings When the timer settings overlap The programme that starts first has priority and the second programme starts recording only after the first programme has finished. if the programmes start at the same time , the programme listed first in the menu has priority. Programme 1 Programme 2 will be cut off Programme 1 Programme 2 about 20 seconds will be cut off about 20 seconds In step 5 above, you can check the TIMER LIST by selecting LIST and pressing OK. [. . . ] The display is not lit when the VCR is in STANDBY mode. T Check that your TV complies with SMARTLINK, NexTView Link, MEGALOGIC, EASYLINK/CinemaLink, Q-Link or TV-LINK. T Make sure you use a 21-pin Scart cable to connect the VCR and your TV. T You have set a timer recording, but the tape on which you want to record is protected (or contains protected recordings). [. . . ]