User manual SONY SLV-SX110B

[. . . ] Caution Television programmes, films, video tapes and other materials may be copyrighted. unauthorized recording of such material may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization from the cable television transmitter and/or programme owner. compatible colour/TV systems · Check the colour systems of your VCR using the table below. [. . . ] " · If you connect additional equipment to the LINE IN 1 or LINE-2 IN*2 jacks, you can select the input signal using the INPUT SELECT or PROG +/­ buttons. The DISPLAY information appears on the TV screen indicating information about the tape, but the information will not be recorded on the tape. If you do not want to watch TV while recording, you can turn off the TV. The DISPLAY information does not appear during still (pause) mode or slowmotion playback. If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will not be correct. This discrepancy is due to the difference between the counting cycles of the two video systems. However, if the clock has already been set, the current setting appears. Turn and press EASY TIMER to set the month, and then the year. After you set the year, "CLOCK" appears in the display window. Turn and press EASY TIMER to set the hour and minute. When you have finished setting the time, press EASY TIMER to start the clock. If you make a mistake, press CLEAR and re-enter the correct number. 3 5 SA2 9 1 9 : 0 0 2 0 : 0 0 The date, start and stop times and ­­ ­­­­ ­­ :­­ ­­ :­­­ ­­ ­­­­ ­­ :­­ ­­ :­­­ tape speed appear on the TV screen. ­ ­­­­ ­­ :­­ ­­ :­­­ ­­ ­­­­ ­­ :­­ ­­ :­­­ · If "­ ­" appears in the "PR" ­­ ­­­­ ­­ :­­ ­­ :­­­ (programme) column (this may SELECT : SET : happen for local broadcasts), you EXIT : MENU END : OK have to set the appropriate programme position manually. To record from other equipment connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the "PR" position. You will only have to do this operation once for the referred channel. If you want to change the date and tape speed: 1 Press </, , to select the item you want to change. To record the same programme every day or the same day every week, see "Daily/weekly recording" on page 44. To record from other equipment, leave the connected equipment switched on. Daily/weekly recording In step 4 above, press m to select the recording pattern. Each time you press m, the indication changes as shown below. T W-SU (every Sunday) t 1 month later t (dates count down) t today To use the VCR after setting the timer To use the VCR before a recording begins, just press ? [. . . ] If you are using a monitor, set it to video input. Existing broadcasts may interfere with the VCR. Select the correct source with the INPUT SELECT button. Select a programme position when recording TV programmes; select a line input when recording from other equipment. [. . . ]