User manual SONY SLV-SX737D

[. . . ] Check that the unit's operating voltage is identical with your local power supply. ⷠIf anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. ⷠThe unit is not disconnected from the mains as long as it is connected to the mains, even if the unit itself has been turned off. ⷠUnplug the unit from the wall outlet if you do not intend to use it for an extended period of time. [. . . ] After you start recording in the normal way, you can have the VCR stop recording automatically after a specified duration. The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. You cannot display the current tape time in the display window when setting the recording duration. You can set the VCR to automatically record programmes from equipment such as a programmable set top box by connecting the equipment to the LINE-3 IN connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from LINE-3 IN. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. On the STB to the time of the programme you want to record, then turn it Down SYNCHRO REC for more than seconds. 3 HoldSYNCHRO REC indicator lights up ontwo front panel and the VCR stands The the by for recording. The VCR automatically turns on and starts recording when it receives an input signal from the STB. Monaural sound is recorded onto the normal audio track along the edge of the tape. Stereo Usually mixed left/right channels Normal audio track (monaural) Hi-fi audio track (main track) Stereo sound (left/right channels) Main (left channel) Sub (right channel) Bilingual Usually main sound To listen to playback sounds in stereo, you must use the EURO-AV or AUDIO OUT connections. ⷠWhen you play a tape recorded in monaural, the sound is heard in monaural regardless of the AUDIO MONITOR setting. If HIFI AUDIO is set to STANDARD, the standard sound will be recorded on both the hi-fi and normal audio tracks. The VCR marks the tape with an index signal at the point where each recording begins. use these signals as references to find a specific recording. The VCR can search up to 99 index signals ahead or behind the current position. /> INDEX signals ahead or behind specify how many index You want to search : · The VCR starts searching and the index number on the TV screen counts down to zero. Playback starts automatically from that point. No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the programme position during recording pause. [. . . ] You cannot watch Canal Plus when the VCR is in standby mode. T If the settings for timer recordings and Synchronized Recording overlap, the programme that starts first has priority and the second programme starts recording only after the first programme has finished. T Be sure that this channel is set as PAY-TV/CANAL+ in the TUNER menu (see page 36). Line selection S23 You cannot select LINE3. [. . . ]