Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SLV-SX80VC. We hope that this SONY SLV-SX80VC user guide will be useful to you.
Lastmanuals help download the user guide SONY SLV-SX80VC.
Detailed instructions for use are in the User's Guide.
[. . . ] To disconnect the cord, pull it out by the plug, never by the cord. Allow adequate air circulation to prevent internal heat buildup. Do not place the unit on surfaces (rugs, blankets, etc. ) or near materials (curtains, draperies) that may block the ventilation slots. [. . . ] If you've inserted a tape with its safety tab removed, the VCR ejects it when you press r REC. The VCR automatically selects either the NTSC, PAL, or MESECAM color system when recording TV broadcasts. When recording, select either SP (Standard Play) or LP (Long Play). LP provides twice as much recording time as SP. However, SP provides better picture quality. you can mix SP and LP on the same tape. When playing back, the VCR automatically detects the tape speed. See the table below for the maximum recording/playback time in each speed. When recording, select either SP (Standard Play) or EP (Extended Play). EP provides three times as much recording time as long as SP. However, SP provides better picture quality. To record on a tape with its safety tab removed, cover the tab hole with adhesive tape. The G-CODE feature of this VCR simplifies the task of making timer recordings. Using G-CODE, you can make all the necessary settings by just entering the desired program's 9-digit code, which is available in your local program guide. To take advantage of this feature, you must first set up your VCR and assign program positions to the various guide channels. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. Turn on your TV and tune in to the VCR. Use the number buttons to enter the desired program's G-CODE number. If you make a mistake, press TIMER CLEAR and enter the correct number. To record NTSC signals in EP mode, set the tape speed to LP. The G-CODE used in this VCR is for Singapore, Malaysia, Hong Kong, Macao, etc. [. . . ] The playback picture does not appear on the TV screen. If you are using a monitor, set it to video input. Make sure the COLOR SYSTEM switch is set to the position corresponding to the color system with which the tape was recorded. Make sure the NTSC PB switch is set to the correct position to match the TV system of your TV. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SLV-SX80VC
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SLV-SX80VC will begin.
