User manual SONY SL-V662HF

[. . . ] 680 Kinderkamack Road Oradell, New Jersey 07649 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For Customers in Canada If this product is not working properly, please call 1-877-602-2008 for Peace of Mind Warranty Replacement service. For other product related questions please contact our Customer Information Service Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon Baker Road, Toronto, Ontario, M2H 3R6 SLV-D100 © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] · Turn on the DVD-VCR and your TV. · Switch the input selector on your TV so that the signal from the player appears on the TV screen. · Press SELECT VIDEO to control the VCR. · When using a cable box, turn it on. · Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. · If the DVD player is in play mode, you cannot display the "SETUP MENU. " Stop the DVD playback. ?/1 SELECT VIDEO CLEAR SET UP TIMER INPUT SELECT x STOP V/v/B/b ENTER O RETURN 1 SET UP Press SET UP. You can also use the TIMER button in VIDEO mode, then you can skip step2. DVD Setup RETURN SETUP MENU VvB b ENTER 40 Recording TV programs using the timer 2 ENTER Press V/v/B/b to select (Set Timer Recording), then press ENTER. The program menu appears. B CH ­­ ­­ ­­ ­­ ­­ ­­ ­­ ­­ START ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ END ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ DATE ­­­ ­­­ ­­­ ­­­ ­­­ ­­­ ­­­ ­­­ SPD --------- RETURN Vv Bb 3 ENTER If necessary, press V/v to select the row that is to be set. 4 ENTER Set the channel number, start and stop time, date, and tape speed: B 1 Press b to flash each item in turn. 2 Press V/v to set each item. To correct a setting, press B to return to that setting and reset. INPUT SELECT CH 35 ­­ ­­ ­­ ­­ ­­ ­­ ­­ START 8 : 0 0 PM ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ END 9 : 0 0 PM ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ DATE 9 / 30 ­­­ ­­­ ­­­ ­­­ ­­­ ­­­ ­­­ SPD SP -------- Basic Operations RETURN Vv Bb To record from a source connected to the LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or V/v to display "L1 " or "L2" in the "CH" position. To record the same program every day or the same day every week, press v while the date is flashing. To check, change or cancel the program setting, repeat the steps of "Recording TV programs using the timer" on page 40. · If the indicator appears, this means that the VCR is currently recording this program. · You can also do the following tasks while the VCR is recording: ­ Reset the counter (page 36). ­ Display tape information on the TV screen (page 38). 42 Recording TV programs using the timer Checking/changing/canceling timer settings ?/1 CLEAR SET UP TIMER Basic Operations V/v/B/b ENTER O RETURN 1 SET UP Press SET UP when the DVD player is in stop mode. You can also use the TIMER button in VIDEO mode, then you can skip step2. DVD Setup RETURN SETUP MENU VvB b ENTER continued Checking/changing/canceling timer settings 43 2 ENTER Press V/v/B/b to select "Set Timer Recording", then press ENTER. · If you want to change a setting, go on to the next step. · If you do not need to change the settings, press O RETURN repeatedly to exit the menu, then turn off the VCR to return to recording standby. RETURN 3 ENTER Press V/v to select setting you want to change or cancel. · To change the setting, press B/b to flash the item you want to change, and press V/v to change it. · To cancel the setting, press CLEAR. B CH 35 20 60 ­­ ­­ ­­ ­­ ­­ START 8 : 0 0 PM 10 : 0 0 AM 8 : 3 0 PM ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ STOP 9 : 0 0 PM 11 : 3 0 AM 10 : 0 0 PM ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ ­ : ­­ DATE 9 / 30 10 / 0 2 9 / 30 ­­­ ­­­ ­­­ ­­­ ­­­ SPD SP EP AUTO ------ CLEAR RETURN Vv Bb 4 RETURN Press O RETURN to confirm the setting. The indicator appears in the display window. 5 RETURN Press O RETURN repeatedly to exit the menu. The DVD-VCR stands by for recording (you do not have to turn off the DVD-VCR). When using a cable box, leave it on. When the timer settings overlap The program that starts first has priority and the second program starts recording only after the first program has finished. [. . . ] Select a channel number when recording TV programs; select "L1" or "L2" when recording from other equipment. · The safety tab has been removed. To record on this tape, cover the tab hole. · Check that the safety tab has not been removed. [. . . ]