User manual SONY SL-V757UC

[. . . ] Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI or mark) to BS1362, (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. [. . . ] After you start recording in the normal way, you can have the VCR stop recording automatically after a specified duration. The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. You cannot display the current tape time in the display window when setting the recording duration. You can set the VCR to automatically record programmes from equipment such as a programmable Set Top Box by connecting the equipment to the LINE-3 IN connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from LINE-3 IN. Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. On the STB to the time of the programme you want to record, then turn it Down SYNCHRO REC for more than seconds. 3 HoldSYNCHRO REC indicator lights up ontwo front panel and the VCR stands The the by for recording. The VCR automatically turns on and starts recording when it receives an input signal from the STB. If HIFI AUDIO is set to STANDARD, the standard sound will be recorded on both the hi-fi and normal audio tracks. The VCR marks the tape with an index signal at the point where each recording begins. use these signals as references to find a specific recording. The VCR can search up to 99 index signals ahead or behind the current position. /> INDEX signals ahead or behind specify how many index You want to search : · The VCR starts searching and the index number on the TV screen counts down to zero. Playback starts automatically from that point. No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the programme position during recording pause. Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. The distortion should disappear as you press one of the two buttons (the indicator lights up). The Reality Regenerator (RR) function automatically restores the picture to its original quality during playback. [. . . ] T Make sure you are pointing the remote commander at the remote sensor on the VCR. T Replace all of the batteries in the remote commander with new ones if they are weak. T If the settings for timer recordings and Synchronized Recording overlap, the programme that starts first has priority and the second programme starts recording only after the first programme has finished. Remote commander S21 You cannot control your TV. [. . . ]