User manual SONY SL-VD560P

[. . . ] 2-584-679-13 (1) US DVD Player/ Video Cassette Recorder Operating Instructions For customers in the USA If you have any questions about your Sony DVD-VCR, you may call Sony Customer Information Services Company at 1-800-VHS-SONY (847-7669). For all other Sony product questions, please call Sony Customer Information Services Company at 1-800-222-SONY (7669). Or write to: Sony Customer Information Services Company 12451 Gateway Boulevard Ft. Myers, FL 33913 For Customers in Canada If this product is not working properly, please call 1-877-602-2008 for Peace of Mind Warranty Replacement service. [. . . ] To use the DVD-VCR after setting the timer To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: · · · · Reset the counter (page 44). Display tape information on the TV screen (page 46). Watch another TV program (page 47). Tip · To check, change or cancel the program setting, see "Checking/changing/canceling timer settings" on page 59. Notes · If the VCR does not accept the PlusCode number, this means that: ­ The PlusCode number is incorrect. ­ "Once, " "Daily, " "Mo~Sa, " "Mo~Fr" or "Weekly" was selected incorrectly. You cannot select "Daily, " "Mo~Sa, " "Mo~Fr" or "Weekly" for a program that airs more than seven days ahead. Correctly set the PlusCode number again from step 2. · When the PlusCode number is incorrect, "Invalid code" will appear in the display. 58 Recording TV programs using the VCR Plus+® system (SLV-D560P only) Checking/changing/canceling timer settings Before you start. . . · Check that the DVD-VCR clock is set to the correct time. · Turn on the DVD-VCR and your TV. · Switch the input selector on your TV so that the signal from the player appears on the TV screen. · Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 10). · When using a decoder, turn it on. · Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. · If the DVD player is in play mode, you cannot display the setup menu. Stop the DVD playback. CLEAR SET UP TIMER V/v/B/b ENTER O RETURN Basic Operations 1 Press SET UP, then press V/v to select (PROGRAM) and press ENTER. You can also display the timer programming menu by pressing TIMER. The timer programming menu appears. CH 01 03 06 START END DATE 0 5 3 1 PM 0 7 3 1 PM 1 / 2 0 0 1 3 1 AM 0 3 3 2 AM 1 / 2 1 0 6 3 2PM 0 8 3 2PM 1 / 2 1 SPEED SP Auto EP VvBb RETURN 2 Press V/v to select setting you want to change or cancel. [. . . ] DVD-RW (page 6) A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The DVD-RW has two different modes: VR mode and Video mode. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. DVD+RW (page 6) A DVD+RW (plus RW) is a recordable and rewritable disc. [. . . ]