User manual SONY SL-VN50

[. . . ] 3-868-107-12 (1) Video Cassette Recorder Operating Instructions If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) or write to: Sony Customer Information Center 1 Sony Drive, Mail Drop #T1-11, Park Ridge, NJ 07656 Declaration of Conformity Trade Name: SONY Model No. : SLV-N60/AX20/N50/AX10 Responsible Party: Sony Electronics Inc. Address: 1 Sony Drive, Park Ridge, NJ. 07656 USA Telephone No. : 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SLV-N60 SLV-AX20 SLV-N50 SLV-AX10 © 2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. · Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. · Do not install the unit in an inclined position. [. . . ] You can also do the following tasks while the VCR is recording: · · · · Reset the counter (page 43). Display tape information on the TV screen (page 45). Watch another TV program (page 46). To lock the VCR after setting the timer (Child Lock) When the VCR is turned on, hold down ?/1 POWER on the VCR until the indicator appears in the display window. The VCR turns off and the - indicator remains lit. The VCR will not work except for timer recordings. To unlock the VCR, hold down ?/1 POWER on the VCR until the - indicator disappears from the display window. To stop timer recording while the VCR is locked, press x STOP. The recording stops and the VCR is unlocked. To set the clock 1 Turn DIAL TIMER so that "CLOCK" appears in the display window. 2 Press DIALappears in the display window. "MONTH" 3 Turn DIAL TIMER to set the month. 5 Turn and press DIAL TIMER to set the day and then thewindow again. After you set the year, "CLOCK" appears in the display 6 Turn and press DIAL TIMER to set the hour and minute. 7 When you have finished setting the time, press DIAL TIMER to set the clock. Tips · To cancel a Dial Timer setting, press x STOP on the VCR while you are making the setting. · The program is recorded in the current tape speed. To change the tape speed, press SP/EP before you complete the setting in step 9. · When you are recording a program in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the EP mode. Note that some noise will appear on the picture when the tape speed is changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the ADVANCED OPTIONS menu (page 68). · To check, change, or cancel the program setting, see "Checking/changing/canceling timer settings" (page 61). 50 Recording TV programs using the Dial Timer (SLV-N60/AX20 only) Notes · If eight programs have already been set using the VIDEO Plus+ system (SLV-N60/AX20 only) or the TIMER SET/CHECK menu, "FULL" appears in the display window for about five seconds. · If you set the clock using the Auto Clock Set function, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. · You cannot set the clock to February 29th using the Dial Timer. [. . . ] If you didn't use A/V hookup: · Turn on the cable box. · Set the cable box to channel 3 or 4. · Set the TV to the output channel of the cable box (usually 2, 3, or 4). 2 Insert a tape and press H PLAY. To record a program (For SLV-N60/AX20) 1 Turn on the cable box. [. . . ]