User manual SONY SMO-F561 INSTRUCTION/OPERATION MANUAL

[. . . ] SMO-F561 Serial No. _________________________ Information You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. WARNING Precautions Specifications Laser Type Wavelength Maximum output Semiconductor AlGaInP laser 661 nm ± 6 nm 40 mW CW 60 mW Pulse Safety Considerations Power supply · Be sure to use +5 V, +12 V DC. Damage Prevention Do not subject the drive to shock or vibration Location requirements Careful consideration should be given to the following in selecting a site to install or store your drive. [. . . ] Dieses Etikett befindet sich auf dem inneren Chassis des Laufwerkes. Cooling Requirements Forced-air cooling is required throughout the drive, preventing overheat of the drive mechanism and electrical components. Forced-air cooling must be provided as a system integration. This maximum temperature is applicable to all operating conditions specified in this manual. Measuring Point Disk Cartridge Maximum Temperature 55 °C (131 °F) This MO drive is classified as a CLASS 1 LASER PRODUCT. CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT CAUTION ATTENTION VORSICHT ADVARSEL ADVARSEL VARNING VARO! CLASS 3B LASER RADIATION WHEN OPEN. RADIATIONS LASER DE CLASSE 3B EN CAS D'OUVERTURE. EVITER TOUTE EXPOSITION DIRECTE AU FAISCEAU. KLASSE 3B LASERSTRAHLUNG WENN GEÖFFNET. DIREKTEN KONTAKT MIT DEM STRAHL VERMEIDEN. LASERSTRÅLING AF KLASSE 3B VED ÅBNING. UNDGÅ DIREKTE UDSÆTTELSE FOR STRÅLING. LASERSTRÅLING I KLASSE 3B NÅR DEKSEL ÅPNES. UNNGÅ DIREKTE EKSPONERING FOR STRÅLEN. KLASS 3B LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD. UNDVIK ATT DIREKT EXPONERA DIG FÖR STRÅLNINGEN. AVATTUNA LUOKAN 3B LASERSÄTEILYÄ. [. . . ] Caution: When the Fast SCSI function is used, it is recommended that the host system and SCSI cables should conform to the Fast SCSI. DC Power Connector Pin Assignments Pin Number 1 2 3 4 Description DC +12V +12V Return +5V Return DC +5V BUSY Indicator Emergency Eject Hole Eject Button ISO/IEC 14517 Front View Rear Panel Functional Switch Top Panel View ISO/IEC 13549 SCSI Connector DC Power Connector Pin Assignments of SCSI Connector Signal Name GND GND GND GND GND GND GND GND GND GND GND GND OPEN GND GND GND GND GND GND GND GND GND GND GND GND Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Signal Name DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 DBP GND GND GND (TERM PW) GND GND ATN GND BSY ACK RST MSG SEL C/D REQ I/O Optional Dip Switch Assignments Optional Switch Switch Number 1 2 3 S501 4 5 6 7 8 1 2 3 S502 4 5 6 7 8 Description Reserved Reserved Disable Command Eject Reserved Reserved Reserved Disable Write Cache Disable Auto Spin-up Reserved Reserved Reserved Reserved Disable SCAM Selection Reserved Reserved Enable Write Cache for Write and Verify Command ISO/IEC 10089 ISO/IEC 11560 GND Terminal Rear View SCSI and DC Power Connector The SCSI and DC Power Connector is located at the upper rear of the drive. [. . . ]