User manual SONY SMU-M10

[. . . ] C Due to the nature of this optical mouse, do not use the mouse on glass, a mirror, or glossy surfaces as it will not work properly. Use the mouse with a mouse pad, or lay something suitable under it. (After disconnecting the mouse from the USB port, reconnect it after about five seconds. [. . . ] The mouse is recognized by your computer, and is ready for use. When you connect this mouse to your computer, or when you start up your computer, do not move this mouse until it is identified. ⷠDo not connect to a computer using a USB hub. The pointer sometimes does not move even though the mouse works. C Due to the nature of this optical mouse, do not use the mouse on glass, a mirror, or glossy surfaces as it will not work properly. Use the mouse with a mouse pad, or lay something suitable under it. The following URL contain information on the latest customer support for the mouse, and frequently asked questions and answers. Nothing happens when I press the buttons of the mouse. This mouse does not support the OS of your computer. Connect this mouse to a USB port of your computer. Your computer automatically recognizes the mouse, allowing you to use it. ­ Windows Vista is either a registered trademark of Microsoft Corporation in the United States and/or other countries. ­ All other names of company and products are trademarks or registered trademarks of their respective owners. TM and ® marks are omitted in this manual. ­ Copyright laws prohibit reproducing the software supplied with this mouse or the manual accompanying it in whole or in part, or renting the software without the permission of the copyright holder. ­ In no event will SONY be liable for any financial damages, or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this mouse. ⭠In the event a problem occurs with this product as a result of defective manufacturing , SONY will replace it. However, SONY bears no other responsibility. [. . . ] Even while my mouse is in use, the display is dark, or the computer enters the System Standby mode or the System Hibernation mode. Depending on the USB equipment you use, the computer may enter the System Standby mode or the System Hibernation mode even while the USB equipment is being used. C To prevent your notebook computer from entering these modes, change the power management settings of the computer. [. . . ]