Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SPM-TRI/C. We hope that this SONY SPM-TRI/C user guide will be useful to you.
Lastmanuals help download the user guide SONY SPM-TRI/C.
Manual abstract: user guide SONY SPM-TRI/CINSTALLATION MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] ®
INSTALLATION MANUAL
Sony Electronics Inc. 16450 West Bernardo Drive San Diego, CA 92127 www. sony. com/plasma
Contents
o o o o o o Safety & precautions Mount diagrams Parts List Building the stand Securing the plasma to the stand Tabletop fixed installation (optional)
Safety & Precautions
WARNING: Safety precaution measures must be practiced at all times during the installation of this product. [. . . ] Fixed tabletop mounting holes Dimensions are in Inch and mm
18. 25 (463. 5)
20. 50 (520. 7)
20. 00 (508)
1. 00 (25. 4)
12 X 22 (304 x 558)
(A)
MODEL
PFM-32C1 FWD32LX1, FWD32DV1 PFM-42B1, PFM-42V1, FWD42X1 PFM-42LX1, FWD42DV1 PFM-50C1 PFM-50DV1
A
. 37 1. 0 . 72 1. 0 . 90 1. 0 (9. 4) (25. 4) (18. 2) (25. 4) (22. 8) (25. 4)
-3-
Parts List
TOOLS & SUPPLY NEEDED HARDWARE
Phillips screwdriver
(4) M5 x 10 (mm) flat head Phillip screws (4) Clear rubber feet (6) M5 x 30 (mm) flat head Phillip screws (2) M6 x 30 Phillips head screws (used on the 30" plasma only) (2) M5 x 12 (mm) phillip security screws (used on 42" and 50" plasma displays only) (2) #10 x 1-3/4" wood screws (Optional use)
Building the stand
Step 1 Unpack the components from the box and set them on the floor. Invert and apply the four (4) clear rubber feet to the flat surface on the base, locate the four mounting points on the clear base. Secure the two (2) upright supports (flat surface facing out) to the base by using the four (6) M5 x 30 (mm) Phillip screws (supplied). CAUTION: Do not over tighten the screws.
Uprights
Clear base
(6) M5 x 30 Flat head screws
Step 2 The stand fits a 32" 42" and 50" PFM series (Sony plasma displays only). The plate is stamped with two plasma sizes. Check the size that fits your plasma before installing. NOTE: If using a 32" plasma, the plate is not needed. Mount the plasma quick release sleeves from the plasma to the key-holes on the uprights. The size and arrow must always point up prior to installation, finger tighten the (4) M5 x 10 (mm) phillips flat head screws then tighten the screws. See figure 2.
50" 42"
(4) M5 x 10 Flat head screws
Mounting plate
-4-
Securing the plasma to the stand
Step 3 Raise the display with the securing sleeves installed to the plasma. [. . . ] NOTE: Longer or shorter wood screws and or mounting hardware depending on your installation environment are (commercially available). See figure 5.
Wood 1-1/4" #10 x screw wood screws access
Flat wood surface
NOTE: Check all hardware for proper tightness and security.
-6- [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SPM-TRI/C
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SPM-TRI/C will begin.
