User manual SONY SPP-A1050

[. . . ] 3-230-536-11(3) When programming emergency numbers and (or) making test calls to emergency numbers: 1. Remain on the line and briefly explain to the dispatcher the reason for the call. Perform such activities in the off-peak hours, such as early morning or late evenings. Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation. Battery duration A fully charged battery pack lasts for about: · Approx. [. . . ] · The display flashes "99" if you record a memo for more than 99 seconds. · If a call comes in during recording, the recording will be stopped. On power failure · During a power interruption, you cannot make or receive calls, and you cannot use the answering machine. For the customers in the USA RECYCLING NICKEL-CADMIUM BATTERIES Nickel-Cadmium batteries are recyclable. You can help preserve our environment by returning your unwanted batteries to your nearest point for collection, recycling or proper disposal. Note: In some areas the disposal of nickel-cadmium batteries in household or business trash may be prohibited. RBRC (Rechargeable Battery Recycling Corporation) advises you about spent battery collection by the following phone number. Call toll free number: 1-800-822-8837 (United States and Canada only) Caution: Do not handle damaged or leaking nickel-cadmium batteries. To check the greeting Press (MENU) repeatedly until "Set out-going message" is announced. Then press (PLAY/STOP) to play back the greeting. Additional tasks when playing back messages To Stop playback Repeat the current message Skip the current message Go back to the previous message Play back slowly Play back quickly Do this Press a mailbox button ((MAILBOX 1), (MAILBOX 2) or (MAILBOX 3)). Press (REPEAT/SLOW) within the first two seconds of the current message playback. Press and hold (REPEAT/SLOW) during play back. Release (REPEAT/SLOW) to return to normal. Press and hold (SKIP/QUICK) during play back. Release (SKIP/QUICK) to return to normal. To change the greeting Record a new greeting by following the instructions on the previous page. The new greeting replaces the old one. Operating from an outside phone Setting the remote ID code (security code) To operate the answering machine from a touch-tone phone while you are away from home, you need to set the remote ID code (security code). To erase the greeting 1 2 Press (MENU) repeatedly until "Set out-going message" is announced. Press (ERASE). (VOLUME) 1 Press (MENU) repeatedly until you hear "Set security code". Troubleshooting Should any problem persist after you have made these checks, consult your nearest authorized Sony dealer. Notes · You can also erase the greeting during playback. · If you have erased your own greeting, the prerecorded greeting will be assigned automatically. Notes · If a call comes in, the play back will stop. · A time and day stamp is announced after each message. Tips · If there are no new messages, all the previously reviewed messages are played back. · The messages are saved even after a power failure. 2 Press (SELECT) to change the remote ID code (security code) setting. The new remote ID code (security code) is announced. menu setup mode. Prerecorded greetings Normal mode: "Hello, I'm unable to answer your call right now. Please leave your name, number and message after the tone. " 3 Press (TIME/SET) to confirm your 4 Press (PLAY/STOP) to exit the Note Press and hold (SELECT) to increase the remote ID code (security code) by 10. Problem You hear four short error beeps when you press (TALK/FLASH). You hear no dial tone. Solution · Make sure you have set up the base unit correctly. [. . . ] 2 Plug the telephone line cord to the LINE jack and the AC power adaptor to the DC IN 9V jack, and hook the cords. Align the f marks of the wall bracket with those of the base unit. 4 Press (PLAY/STOP) to exit the menu setup mode. The display shows "A" when the answering machine is set to the announcement only mode. 3 Attach the wall bracket to the center of 2 Telephone line cord A F (ANSWER ON/OFF) Mailbox usage This phone offers you three voice mailboxes, providing a convenient way to share the mailbox feature with other members of your household or business. Notes · To activate announcement only mode, you have to turn on the answering machine. · The announcement only mode is preset to off. 4 Plug the telephone line cord to the Specification General Frequency band Operating channel Dial signal Supplied accessories 902 - 928 MHz 30 channels Tone, 10 PPS (pulse) selectable AC power adaptor AC-T130 Telephone line cord (1) Rechargeable battery pack BP-T18 Directories (1 sheet) Wall bracket (1) Rechargeable battery pack BP-T18 Standby: Approx. [. . . ]