User manual SONY SPP-A2780

[. . . ] 3-232-153-11 (1) Cordless Telephone with Answering System Operating Instructions US Hearing-Aid Compatible SPP-A2780 ©2001 Sony Corporation IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. [. . . ] You can enter up to 20 digits, including a tone and a pause, each of which is counted as one digit. When the phone number of 16 digits or more has been entered, the phone number appears in two lines. SONY 1234567_ NEW OLD MASSAGE RING OFF SONY 1234567890123456 78_ NEW OLD MASSAGE RING OFF 6 Press (PGM) (or (PROGRAM)). You hear a long confirmation beep, and the name and the number are stored. The display goes off. 44US Telephone Features Notes · If you try to save a 51st phone number, you will hear five short error beeps and "THE MEMORY IS FULL" will be displayed. To store another phone number, erase one of the stored phone numbers (see page 49). · Names cannot be entered using the dialing keys. · Do not allow more than 60 seconds to elapse during the operation procedure. Tips · When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. · If you have entered a wrong name or number in step 3 or 5, turn Jog Dial to choose "P" then press Jog Dial or press (ERASE) to erase it. Then enter the correct name or number. To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 5 on page 44, do as follows: Telephone Features 1 2 Enter the outside line access digit (e. g. , 9). Press (REDIAL/PAUSE). To store the dialed phone number into the Phone Directory The dialed phone numbers of up to 20 digits can be stored in the Phone Directory. 1 2 3 4 5 Press (REDIAL/PAUSE). Display the name or phone number you want to call by turning Jog Dial, and then press Jog Dial. Turn Jog Dial to choose "PROGRAM", and then press Jog Dial. Enter the name by doing steps 3 and 4 on pages 43 to 44. (Press (PROGRAM) on the base phone. ) You hear a long confirmation beep, and the name and the number are stored. continued Telephone Features 45US Phone Directory (continued) Making calls from the Phone Directory Turn Press 1 Press Jog Dial. "PHONE DIRECTORY" appears on the display. PHONE DIRECTORY ABC DEF NEW OLD MASSAGE RING OFF (TALK) (PGM) (EZ ACCESS) 2 Turn Jog Dial to select an alphabet group ([ABC], [DEF]. . . ) which includes the initial character of the name you want to search for, and then press Jog Dial. If a numbers or a symbol is the initial character, select the "[etc]" group. TUV WXYZ etc NEW OLD MASSAGE RING OFF 3 Select the name you want to call by turning Jog Dial. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 4 Press Jog Dial. (GO BACK) DIAL EDIT NEW OLD MASSAGE RING OFF 46US Telephone Features 5 Turn Jog Dial to choose "DIAL", and then press Jog Dial. The phone number will be dialed. Tips · When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. · If there is no data recorded in the selected alphabet group in step 2, the data memory of the next following group will be displayed. · You may press (TALK) on the cordless handset (on the base phone, pick up the handset or press (SPEAKERPHONE)) to make a call instead of doing steps 4 and 5. · If an access number of the long distance call is set up with the EZ access function, you can add the access number to the phone number and make a call by pressing (EZ ACCESS) after step 3. For setting up the EZ access function, see page 23. Telephone Features continued Telephone Features 47US Phone Directory (continued) Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on page 46. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 2 Press Jog Dial. (GO BACK) DIAL EDIT NEW OLD MASSAGE RING OFF 3 Turn Jog Dial to choose "EDIT", and then press Jog Dial. The cursor "_" is at the right of the name. SONY_ ABCDEFGHIJKLMN OPQRSTUVWXYZ NEW OLD MASSAGE RING OFF 4 Turn Jog Dial to choose "P", then press Jog Dial or press (ERASE) to erase the characters, and enter the new name. If you want to change only the number, skip this step. [. . . ] Please answer the call after the second ringer sound. · Make sure you have subscribed to "Caller ID with call waiting" service (page 85). · Make sure nobody is talking with another phone on the same telephone line. · Make sure you entered your area code correctly (page 17). [. . . ]