User manual SONY SPP-A967

[. . . ] Setting the Calling Party Control Switch. Answering System Troubleshooting Chart . . 44 44 47 48 49 52 57 59 59 60 61 61 62 64 66 69 74 76 77 78 79 81 82 82 84 86 86 87 88 2 Important Safety Instructions When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Follow all warnings and instructions marked on the product. [. . . ] Press REMOTE on the Handset. TALK REMOTE TALK BATT LOW The TALK/BATT LOW LED lights orange. 1 2 ABC DEF 1 1 6 GHI 2 7 JKL 3 3 MNO 4 4 PRS 5 9 TUV 6 5 WXY 7 Press * Then enter the number which corresponds to the day. 8 9 2. 3. Enter the two digit number for the hour (01-12) and the minute (00-59). To set AM, press * To set PM, press # 4. Note: A beep indicates the new time is programmed, and the new time is announced in the Handset receiver. 47 5. 6. Press REMOTE to return to Standby. For example, to set Tuesday at 3:20 PM, press REMOTE followed by these keys. *30320# Note: Remember to press REMOTE again to return to Standby. Reviewing Time/Day Stamp Handset Operation 1. The time/day setting is announced each time the Handset remote function keys are selected. Press REMOTE. TALK REMOTE TALK BATT LOW 1 2 ABC DEF 1 1 6 GHI 2 7 JKL 3 3 MNO The Handset beeps and the time/day is announced, followed by the total number of messages recorded in all mailboxes. The TALK/BATT LOW LED lights orange. 4 4 PRS 5 9 TUV 6 5 WXY 7 8 9 2. To replay the current time/day while using the remote keys, press !. TALK REMOTE TALK BATT LOW The Handset beeps and the time/day is replayed, followed by the remaining recording time available for new messages. 1 2 ABC DEF 1 1 6 GHI 2 7 JKL 3 3 MNO 4 4 PRS 5 9 TUV 6 5 WXY 7 8 9 3. Press REMOTE again to return to Standby. Press STOP The speaker beeps, and the time is announced followed by the remaining recording time available. Setting Your Outgoing Message (OGM) When you receive a call, the Answering System answers and automatically plays either a preset message or your personal OGM. Preset Messages The XCA4510/15 has two messages programmed in its memory. If the REC TIME/ANN-1 switch is in the right position, the first preset message below plays, and all incoming messages are limited to one minute. If the switch is set in the left position, (i. e. Tell them to press these keys after hearing the tone. *2 Note: You can leave up to a 60-second outgoing message for Mailbox 1, and up to a 30-second outgoing message in each of the other three mailboxes. 7. After you have recorded your message, your Answering System will automatically return to Standby in 15 seconds. The MAILBOX LED goes out and the Message Counter LED resets to zero if you don't have saved messages. 56 Selecting a Preset OGM After you have recorded an outgoing message for Mailbox 1, you can set your Answering System to play either the preset message or your outgoing message. Note: You can only select a preset outgoing message for Mailbox 1. 1. Press MAILBOX . A tone will sound, and you hear the announcement "Mailbox 1. You have no messages" on the Base Unit speaker. The MAILBOX Button LED and Mailbox 1 LED light. 2. Press OGM. Your recorded outgoing message will begin to play. 3. While your recorded outgoing message is playing, press OGM again. A tone will sound, and you hear the preset message "Hello. No one is available to take your call, please leave your message after the tone" on the Base Unit speaker. A second tone sounds after the preset message plays, and the Answering System automatically returns to Standby. Note: If the REC TIME/ANN-1 switch is set to Announce Only, then the preset message "Hello. No one is available to take your call" is played. 57 4. To select your recorded message again, press MAILBOX. A tone will sound, and you hear the announcement "Mailbox 1. You have no messages" on the Base Unit speaker. [. . . ] To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. RECHARGEABLE NICKEL-CADMIUM BATTERY WARNING This equipment contains a Rechargeable Nickel-Cadmium Battery. Cadmium is a chemical known to the State of California to cause cancer. The Rechargeable Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. Do not charge the Rechargeable Nickel-Cadmium Battery used in this equipment in any charger other than the one designed to charge this battery as specified in this Guide. [. . . ]