User manual SONY SPP-N1025

[. . . ] 3-230-547-11 (1) Cordless Telephone Operating Instructions US SPP-N1025 ©2001 Sony Corporation Owner's Record The model and the serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ________________ INFORMATION FOR FCC REGULATION CLAIM 1. [. . . ] 2 Display "SET ONE TOUCH" using the Jog lever. 3 Press (SELECT). (TALK) If a number is stored, it appears on the display. To store a new number, lower the Jog lever several times to erase it. (#) Telephone Features SET ONE TOUCH (*) (REDIAL/PAUSE) (ONE TOUCH) 4 Enter the phone number. You can enter up to 16 digits, including a tone and a pause, each of which is counted as one digit. 5 Press (PGM). You will hear a long confirmation beep, and the number is stored. The display goes off. continued Telephone Features 23US One-touch dialing (continued) Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tips · You may press (ONE TOUCH) instead of doing steps 2 and 3. · The entered phone number (*) and (#) are displayed as " " and " " respectively in step 4. · You may press (SELECT) instead of pressing (PGM) in step 5. To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 4 above, do as follows: 1 2 1 2 Enter the outside line access digit (e. g. , 9). Press (REDIAL/PAUSE). Making calls with one-touch dialing Press (TALK) and wait until "TALK" appears on the display. The phone number stored on the one-touch dialing button will appear on the display and will be dialed. Making Long Distance Calls with one-touch dialing First of all, store the access number in "Storing phone number" abovementioned steps, then do as follows: 1 2 3 Perform steps 1 and 2 in "Making calls with one-touch dialing" above. Display "DIRECTORY" by pressing (SELECT). Display the name and phone number you want to call (see page 27), then press (SELECT) or (TALK). When you leave the Jog lever raised, or lowered, the names and phone numbers on the display scroll fast. To check the phone number before one-touch dialing While the handset is not in use, press (ONE TOUCH). The number stored on the button appears on the display for 20 seconds. To dial the number, press (TALK) while the number is displayed. 24US Telephone Features Speed dialing You can dial with a touch of a few buttons by storing a phone number on a dialing key. You can store up to 10 different phone numbers on the base phone. Storing phone numbers on the base phone 1 Press (PGM). The SPEAKERPHONE button flashes. 2 Press (SPEED DIAL). 3 Press one of the dialing keys ((0) to (9)) for the phone number to be stored. Telephone Features You will hear a confirmation beep. 4 Enter the phone number you LINE lamp (REDIAL/PAUSE) (SPEAKERPHONE) want to store. You can enter up to 16 digits, including a tone and a pause, each of which is counted as one digit. 5 Press (PGM) again. You will hear another confirmation beep, and the number is stored. Notes · In step 4, if you don't enter the phone number, the previously stored number will be erased. · Do not allow more than 20 seconds to elapse between each step of the procedure. · You cannot store phone numbers on the base phone while the handset is being used. The LINE lamp will light up to indicate this condition. Tips · In step 4, if you enter a wrong number, press (PGM), then start from the beginning. · Use the supplied directory to write down what you have stored to the speed dialing numbers. continued Telephone Features 25US Speed dialing (continued) To store the previous number dialed Press (REDIAL/PAUSE) directly after step 3 on the previous page, then go to step 5. To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 4 on the previous page, do as follows: 1 2 Enter the outside line access digit (e. g. [. . . ] · Move the handset closer to the base phone. · Place the base phone away from noise sources (page 6). You cannot store a speed dialing number. Speed dialing You cannot make a speed dialing call. Speed dialing is incorrect. Additional Information Phone Directory Intercom You hear five short error beeps and cannot store a number in the Phone Directory. [. . . ]