User manual SONY SPP-S2720

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SPP-S2720. We hope that this SONY SPP-S2720 user guide will be useful to you.

Lastmanuals help download the user guide SONY SPP-S2720.


Mode d'emploi SONY SPP-S2720
Download

You may also download the following manuals related to this product:

   SONY SPP-S2720 (670 ko)
   SONY SPP-S2720 (682 ko)
   SONY SPP-S2720 annexe 1 (682 ko)
   SONY SPP-S2720 DATASHEET (133 ko)

Manual abstract: user guide SONY SPP-S2720

Detailed instructions for use are in the User's Guide.

[. . . ] 3-232-392-13 (1) Cordless Telephone Operating Instructions US Hearing-Aid Compatible SPP-S2720 ©2001 Sony Corporation IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. [. . . ] Press (CALL WAITING/FLASH) again to return to the first caller. Switch to tone dialing temporarily Switch to another call ("call waiting" service*2) *1 If four minutes has passed after you put a call on hold, the connection will be broken automatically. *2 You need to subscribe to this service from your telephone company. continued Basics 31US Making calls (continued) Notes · When making a call on the cordless handset, " " appears on the display indicating the receiver sensitivity with the base unit. Three bars indicate a good reception, no bar indicates a bad reception. When calling from an area with poor reception, you may experience interference or the call may be disconnected, so try to use the cordless handset in areas that have a good reception. · When you increase the sound volume, in some cases the back ground noise may be increased as well. You should adjust the volume accordingly. · If the cordless handset beeps every second during a conversation and " " appears on the display, move closer to the base unit; otherwise, you will hear five short error beeps and "NO CONNECTION" will appear on the display, and the call will be disconnected after 30 seconds. · When the talk time exceeds 9:59:59, the display counts from 0:00:00 again. If the battery becomes weak during a call The cordless handset will beep twice per second, "BATTERY LOW" appears on the display. Finish your call and replace the cordless handset on the base unit to charge the battery pack. For optimum performance, charge the battery for a full 12 hours. Note that during the initial charge time (approx. 10 minutes), "PLEASE WAIT. . . " and "BATTERY LOW" appear on the display and the cordless handset cannot be used. After "BATTERY LOW" turns off, you may be able to use the cordless handset, but the battery duration will be very short; thus it is recommended that you fully charge the battery before next use. 32US Basics Redialing The cordless handset stores five dialed phone numbers. Turn Press 1 Press (REDIAL/PAUSE). 2 Display the name or phone number you want to call by turning Jog Dial. 3 Press Jog Dial. 4 Turn Jog Dial to choose "DIAL", and then press Jog Dial. The phone number will be redialed. (PGM) (EZ ACCESS) Basics Notes · The redial memory only registers up to 32 digits. · If an access number of the long distance call is registered in (EZ ACCESS), the number cannot be stored for the redial button use. To redial long distance calls with (EZ ACCESS), press (EZ ACCESS) instead of above steps 3 and 4. Tips · Although the phone number displayed on the redial list is up to 15 digit, the redialing will be successful. · If you redial the same number repeatedly, this number will only be counted as one number of the total five registered numbers that can be redialed. · When dialing from a phone number with a registered name, that name will be displayed in the list in step 2. continued Basics 33US Making calls (continued) To erase the dialed phone number one by one 1 Display the name or phone number you want to erase by doing steps 1 to 3 on page 33. 2 3 Turn Jog Dial to choose "ERASE REDIAL", and then press Jog Dial. Turn Jog Dial to choose "YES", and then press Jog Dial. [. . . ] · You have answered the call while "** RINGING **" was displayed. Please answer the call after the second ringer sound. · Make sure you have subscribed to "Caller ID with call waiting" service (page 58). · Make sure nobody is talking with another phone on the same telephone line. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SPP-S2720

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SPP-S2720 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag