User manual SONY SPP-160

[. . . ] Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. [. . . ] Turn Jog Dial down to erase the number and enter the new number. If you don't want to change the number, skip this step. SMITH 1234567 7 Press Jog Dial. You will hear a long confirmation beep and the name and/or the number is changed. Tip When the phone number of 17 digits or more has been entered, "­" is displayed next to 15th digit and then the all digits are displayed in two lines after about two seconds. 34US Telephone Features Erasing a memory location 1 Display the name and phone number you want to erase by doing steps 1 and 2 in "Making calls from the Phone Directory". Press Jog Dial. SONY 1234567 2 3 4 DIAL EDIT ERASE 1234567 Turn Jog Dial up to make "ERASE" flash and press Jog Dial. ERASE NO YES 1234567 Turn Jog Dial up to make "YES" flash, then press Jog Dial. You hear a long confirmation beep and the memory location is erased. Telephone Features Making calls from the Phone Directory 1 Press Jog Dial. Turn Press "DIRECTORY" appears on the display. 2 Display the name and phone number you want to call. (LINE 2) (LINE 1) To search in alphabetical order: Turn Jog Dial up or down. To search by entering the initial character: Press the dialing key of the desired character, then turn Jog Dial. SONY 1234567 3 Press Jog Dial. DIAL EDIT ERASE 1234567 4 Press Jog Dial again. The phone number will be dialed. continued Telephone Features 35US Phone Directory (continued) Tips · You may press (LINE 1) or (LINE 2) to make a call instead of doing steps 3 and 4. · When you press Jog Dial in step 4, the vacant line is automatically connected. When neither line is in use, line 1 is connected. About the search order The names appear in the following order when you turn Jog Dial up or down. t t · Alphabetical order: ABC. . . XYZ y symbols y * y # y 0 - 9 · Initial character: To search for "SONY" for example, press (7) and then turn Jog Dial to search through the names starting with P, Q, R, S or 7. 36US Telephone Features Setting the ringer type You can select a ringer type of the handset from four type. Turn Press 1 Press (PGM). 2 Turn Jog Dial up to make "RINGER" flash. DIRECTORY AREA RINGER 3 Press Jog Dial. LINE1 LINE2 Telephone Features 4 Turn Jog Dial to choose the line you want to set the ringer type. 5 Press Jog Dial. The current ringer type appears. RINGER 1 SELECTED 6 Press one of the dialing keys ((1) to (4)) to select a ringer type. · If you have accidentally pressed (HOLD) in step 1, just press (INTERCOM) and you will get the same result as by pressing (INTERCOM) only. 42US Telephone Features To transfer from the handset to the base unit 1 Press (INTERCOM) to page the base unit. After the base unit rings twice, you will be connected automatically. When a person at the base unit answers, you can talk with each other. "INTERCOM" appears on the display of the handset and the INTERCOM lamp on the base unit lights up. (OFF) Telephone Features 2 Press (LINE 1) or (LINE 2) which is flashing on the base unit to talk to the caller with the base unit. The corresponding line button of the base unit lights up. (LINE 1) (LINE 2) INTERCOM lamp If no one answers the phone Press (OFF) on the handset. Tip You can receive an intercom call on the base unit even when the L1 or L2 RINGER LEVEL switch on the base unit is set to OFF. The base unit will ring at a low level. Telephone Features 43US Having a conference call You can talk on two lines at the same time and you can also talk on one line, the handset and the base unit at the same time. Making another call while talking You can talk with two parties at the same time using both line 1 and line 2. (Three-way conference) 1 Press (HOLD) while talking on one line. The line in use is put on hold. 2 Press (LINE 1) or (LINE 2), whichever is not used. (LINE 2) (LINE 1) (OFF) 3 Dial a phone number for the second party. 4 Press (CONF) (conference) after the second party is connected. "CONFERENCE" appears on the display. (CONF) (HOLD) Now you can talk to both parties. (LINE 1) (LINE 2) (OFF) 44US Telephone Features Receiving a call while talking If another call comes in while talking, the LINE 1 or LINE 2 button on which another call is coming will flash. 1 2 3 Press (HOLD). Press (LINE 1) or (LINE 2), on which another call is coming. (Three-way conference) Note If you do not press (HOLD) in step 1, the first line will be disconnected. To disconnect the lines during a three-way conference To disconnect both lines at the same time, press (OFF). [. . . ] · You have answered the call while "** RINGING **" was displayed. Be sure to answer after the Caller ID data is displayed. · Make sure you have subscribed to "Caller ID with call waiting" service (page 69). · Make sure nobody is talking with another phone on the same telephone line. [. . . ]