User manual SONY SPP-A9276

[. . . ] 3-221-208-11 (1) Cordless Telephone with Answering System Operating Instructions US SPP-A9276 ©2000 Sony Corporation Owner's Record The model and the serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ________________ 2US IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. [. . . ] · You may press (PROGRAM) instead of doing steps 5 and 7. · Phone numbers can be entered using the dialing keys in step 6. Telephone Features To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 6 on page 40, do as follows: 1 2 Enter the outside line access digit (e. g. , 9). Turn Jog Dial to choose "[P]" and then press Jog Dial, or press (REDIAL/PAUSE). Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on page 39. Turn Jog Dial to choose "[P]", then press Jog Dial to erase the characters, and enter the new name. If you want to change only the number, skip this step. ENTER NAME SONY_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER 2 continued Telephone Features 41US One-touch dialing (continued) 3 Turn Jog Dial to choose "[NUMBER]", and then press Jog Dial. The cursor is at the right of the phone number. 4 SONY 1234567_ 0123456789*# F P VIP PGM Turn Jog Dial to choose "[P]", then press Jog Dial to erase the number, and enter the new number. If you don't want to change the number, skip this step. 5 Turn Jog Dial to choose "[PGM]", and then press Jog Dial. You hear a long confirmation beep and the name and/or the number is changed. Note The stored record with name and number can be replaced with a new name and number but it is not possible to erase the whole entry at one time. Tips · Single character and number can be erased by pressing (ERASE) in steps 2 and 4. · You may press (PROGRAM) instead of doing steps 3 and 5. Making calls with one-touch dialing 1 2 Press (TALK) or (LONG DIST. SAVER) and wait until "TALK" appears on the display. Press one of the ONE-TOUCH DIAL buttons ((A) to (C)). The phone number stored on the one-touch dialing button will appear on the display and will be dialed. To check the phone number before one-touch dialing While the cordless handset is not in use, press one of the ONE-TOUCH DIAL buttons ((A) to (C)). The number stored on the button appears on the display for 20 seconds. To dial the number, press (TALK) while the number is displayed. 42US Telephone Features Phone Directory You can dial a number by scrolling through the Phone Directory. Both the base phone and the cordless handset can each store up to 50 separate numbers. Storing phone numbers and names Turn Press 1 Press (PROGRAM). (Cordless handset) HANDSET MENU GO BACK PHONE DIRECTORY ONE-TOUCH DIAL QUICK TALK Telephone Features If "PHONE DIRECTORY" is not selected, turn Jog Dial to select it. 2 Press Jog Dial. (If you're at the base phone, press Jog Button (ENTER). ) "ENTER NAME" appears on the display. ENTER NAME _ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER 3 Enter the name and the phone number by doing steps 4 to 7 on pages 40 to 41. Note If you try to save a 51st phone number, you will hear five short error beeps and "THE MEMORY IS FULL. " will be displayed. You cannot store the phone continued number. To store another phone number, erase one of the stored phone numbers (see page 45). Telephone Features 43US Phone Directory (continued) Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on pages 46 to 47. BROWN JOHN SONY SMITH JOHN SALINGER GREG WAGNER ANTHONY GO BACK 2 Press Jog Dial. (If you're at the base phone, press Jog Button (ENTER). ) DIAL LONG DISTANCE EDIT ERASE DIRECTORY ENTER NAME 3 Turn Jog Dial to choose "EDIT", and then press Jog Dial (or Jog Button (ENTER)). The cursor is at the right of the name. SONY_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER 4 Change the name and/or the phone number by doing steps 2 to 5 on pages 41 to 42. 44US Telephone Features Erasing a memory location To erase the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on pages 46 to 47. BROWN JOHN SONY SMITH JOHN SALINGER GREG WAGNER ANTHONY GO BACK 2 Press Jog Dial. [. . . ] · You have answered the call while "** RINGING **" was displayed. Please answer the call after the second ringer sound. · Make sure you have subscribed to "Caller ID with call waiting" service (page 80). · Make sure the "Caller ID with call waiting" service is set to "ACTIVE" (page 19). [. . . ]