User manual SONY SRF-M10

[. . . ] While holding down BAND, keep pressing PRESET 4 for more than 5 seconds. If you proceed step 2 again, the channel step changes again. Operate the unit only on 3V DC with two R03 (size AAA) batteries. [. . . ] â· In vehicles or buildings, radio reception may be difficult or noisy. â· To clean the casing, use a soft cloth dampened with a mild detergent solution. â· This product is not designed to be waterresistant, so you should take care to use the unit when raining, snowing or in a watersplash place. Insert two R03 (size AAA) batteries (not supplied) with correct polarity. When the AM channel step is changed, the preset stations will be erased. Each press changes the band as follows: * When using FM1 or FM2 preset mode, you may listen to the radio on either mode. Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. â· Do not carry the dry batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the batteries are accidentally contacted by a metallic object. â· When you are not going to use the unit for a long time, remove the batteries to avoid damage from battery leakage and corrosion. â· Do not use different types of batteries at the same time. â· When you replace the batteries, replace all with new ones. The current time will appear for a few seconds and then the display returns to the radio frequency. Model for other countries The display will flash "AM 12:00" or "0:00" when the batteries are first inserted. [. . . ] Model for other countries The display will flash "AM 12:00" or "0:00" when the batteries are first inserted. Hold down CLOCK for more than 2 seconds. Hold down PRESET button 2 for more than 2 seconds. [. . . ]