User manual SONY SRF-M606

[. . . ] You can tune in the stations easier by AutoScan tuning which automatically receives the stations. You can hear the confirmation beep and preset number "2" appears in the display. The channel step of this unit is factory-set to 10 kHz (models for North and South America)/ 9 kHz (models for other countries). [. . . ] ⷠIf a battery leakage occurs, wipe the battery compartment with a soft cloth before inserting new ones. Road safety Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your headphones at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Preventing hearing damage Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. caring for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to people around you. The display will flash "0:00" when the batteries are first installed. Set the clock when the radio is turned off. While holding down ENTER/CLOCK, press SCAN TUNE/TIME SET + or ­ to set the clock to the current time. Each time you press the button, the digits move forward or back by one. [. . . ] The station cannot be received when a preset tuning button is pressed. Sound is not heard and " the display. * When using FM1 or FM2 preset mode, you may listen to the radio on either mode. [. . . ]