User manual SONY SRF-M806

[. . . ] replace the batteries within one minute. Otherwise, the clock setting and preset stations could be erased. The MEGA BASS function can only be used when i/5 selector is switched to i . [. . . ] It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your headphones at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Preventing hearing damage Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. caring for others Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to people around you. The channel step of this unit is factory-set to 9 kHz or 10 kHz to match the frequency allocation system of the country as listed. When needed, change the channel step before listening to the radio. Area North and South American countries Other countries Channel step 10 kHz 9 kHz While holding down ENTER/CLOCK, keep pressing POWER for more than 5 seconds. If you proceed to step 2 again, the channel step changes again. If there is lightning when you are using the unit, take off the headphones immediately. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. [. . . ] If the desired station cannot be received, tune in the station by pressing SCAN TUNE/TIME SET + or ­ repeatedly. The channel step of this unit is factory-set to 10 kHz (models for North and South America)/ 9 kHz (models for other countries). Area North and South American countries Other countries Channel step 10 kHz 9 kHz You can hear the confirmation beep and preset number "2" appears in the display. [. . . ]