User manual SONY SRF-S83

[. . . ] Example: Display window when you preset FM 90. When to replace the battery You can check the remaining battery power that appears in the display. Weakening* When the battery becomes exhausted, the unit will turn off. Installing the new battery, the indicator changes to " * Displayed only when the radio is turned on. [. . . ] Note Do not take more than 3 minutes to replace the battery, otherwise, your clock settings and preset stations will be initialized. Should that happen, reset the functions again. notes on battery · Do not charge the dry battery. ⷠDo not carry the dry battery together with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery are accidentally come into contact with metallic objects. ⷠWhen you are not going to use the unit for a long time, remove the battery to avoid damage from battery leakage and corrosion. Note Holding down the desired preset tuning button for more than a few seconds will replace the previous station on the preset tuning button with the station you tuned in to. Never leave the unit in a car parked under the sun. ⷠShould any solid object or liquid fall into the unit, remove the battery and have the unit checked by qualified personnel before operating it any further. Hold down CLOCK for more than 2 seconds. The beep sounds and the hour flashes in the display. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Press TUNE/TIME SET + or ­ until the correct hour appears in the display. Should any problem persist after you have made the following checks, consult your nearest Sony dealer. Very weak or interrupted sound, or unsatisfactory reception · In a vehicle or in a building, move closer to a window. The unit is being used in extremely high or low temperatures or in a place with excessive moisture. The station cannot be received when a PRESET TUNING (1 to 6) button is pressed. ⷠYou chose the wrong preset number. [. . . ] The station cannot be received when a PRESET TUNING (1 to 6) button is pressed. ⷠYou chose the wrong preset number. " is flashing in the The power cannot be turned on, and " display. Please note down your settings in case you want to preset them again. [. . . ]