User manual SONY SRP-C1

[. . . ] HD PORTABLE DIGITAL RECORDER SRW-1 SRPC-1 OPTICAL INTERFACE UNIT HKSR-101 HD VIDEO PROCESSOR OPERATION MANUAL [English] 1st Edition (Revised 2) WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. For the customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] A submenu window opens for the selected item. If the selected item is a command, the command is executed. VIDEO button HOME button TC button SELECT/ENTER dial BACK button Submenu window TC Setup HOME TIMER SEL TIMER RESET TIMER PRESET TCR SEL TCG MODE REGENE SOURCE RUN MODE TCG SET(MAIN) OTHERS (MAIN) PD TC CHAR(MON) CHAR (SD) TC OFF KEY INHI ON LIGHT OFF ON BACK SELECT/ENTER TC Setup TIMER SEL TIMER RESET TIMER PRESET TCR SEL TCG MODE REGEN SRC RUN MODE TCG SET(MAIN) OTHERS (MAIN) PD TC CHAR(MON) CHAR (SD) TC LTC PRST INT L R RUN TCG Setting(Main) TC VIDEO LTC PRST INT L R RUN ADJUST AUDIO EJECT Z STOP x PLAY B REC z DF/NDF UBG SRC 12H/24H DF TCG 24H SYSTEM FUNC SRW-1 REW CASS OUT TCR 00:00:00:00 m F FWD M PAUSE X SYSTEM button AUDIO button SRW-1 CASS OUT TCR 00:00:00:00 To return to the HOME screen Press the HOME button or repeatedly press the BACK button. (See the previous figure. ) 3 Rotate the SELECT/ENTER dial to select the desired setting in the submenu window. 4-1 Basic Menu Operations 39 A setting window opens. Setting window TC Setup TIMER SEL TIMER RESET TIMER PRESET TCR SEL TCG MODE REGEN SRC RUN MODE TCG SET(MAIN) OTHERS (MAIN) PD TC CHAR(MON) CHAR (SD) TC LTC PRST INT L R RUN TCG Setting(Main) DF/NDF UBG SRC 12H/24H DF TCG 24H 12H/24H MODE +/-12H 24H SRW-1 CASS OUT TCR 00:00:00:00 4 Rotate or press the SELECT/ENTER dial to select the desired setting. Chapter 4 Menu Settings To return to an upper level Press the BACK button. 40 4-1 Basic Menu Operations 4-2 TC Setup Menu The TC (timecode) Setup menu allows you to make settings related to timecode. In the Settings column of the following table: Item TIMER SEL Settings Selects the type of time data to use. CTL [CTL]: Display the tape running time in Hours:Minutes:Seconds format. Time data is displayed as 00:00:00:00 (timecode) or 00 00 00 00 (user bits). Notes · The values read by the timecode reader cannot be reset. · The timecode generator cannot be reset when it is locked to external timecode or to the values read by the internal timecode reader. TIMER PRESET Selects the type of time data to preset to an arbitrary value. TCG TC: Timecode generated by the timecode generator TCG UBIT: User bits generated by the timecode generator CTL: CTL signal count Selects the type of timecode which you want the internal timecode reader to read during playback. AUTO [Auto]: Read VITC when the playback speed is less than ±1/2 times normal speed, and LTC when the playback speed is more than ±1/2 times normal speed. Selects the type of timecode to which the internal timecode generator synchronizes. PRST [Preset]: Synchronizes to a preset value. You can use the TIMER PRESET item to preset the initial value of the timecode generated by the internal timecode generator. RGN [Regen]: Synchronizes to the timecode selected in the following item REGENE SOURCE (regenerate). Selects the timecode to be regenerated by the internal timecode generator. INT L [Internal LTC]: Timecode recorded in the longitudinal direction on the tape EXT L [External LTC]: Timecode input to the TC IN connector SDI-L [SDI LTC]: Video signal LTC time data input to the HD SDI IN A/B connectors SDI V [SDI VITC]: Video signal VITC input to the HD SDI IN A/B connectors Selects the timecode generator run mode. F RUN [Free Run]: Timecode advances without pause from the time that the system is powered on. R RUN [Rec Run]: Timecode advances only during recording. · Default settings are underlined. · Square brackets indicate settings as displayed in setting windows (see the figure for step 3 on page 51). TIMER RESET Chapter 4 Menu Settings TCR SEL TCG MODE REGENE SOURCE RUN MODE 4-2 TC Setup Menu 41 Item TCG SET(MAIN) Timecode generator settings for the main timecode Settings DF/NDF Selects the frame count mode. (Valid only when the DF [Drop Frame]: Drop-frame mode frame frequency of NDF [Non Drop Frame]: Non-drop frame mode this system is 29. 97 Hz) Selects the source timecode of user bits. TCG [TCG Source]: The same source as the source of the internal timecode generator INT [Internal]: Timecode generated by the timecode generator. [. . . ] Audio signal processing circuitry is not operating. Playback head is not reading digital data from tape. When the optional HKSR-101 is installed, the optical signal level of the signal input to the CAMERA connector is low. Capstan servo lock lost during playback or recording. [. . . ]