User manual SONY SRS-BT100

[. . . ] 3-283-288-11(1) Wireless Speaker System Operating Instructions SRS-BT100 ©2008 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Some Bluetooth stereo audio source devices may connect with the unit automatically when pairing is complete. When the Bluetooth connection is made properly, both the power indicator (green) and communication status indicator (blue) light up indicating that pairing is complete, and pairing information is memorized on this unit. Note If you turn off this unit or the Bluetooth stereo audio source device before the Bluetooth connection is complete, pairing information is not memorized and pairing will not be completed. 10 When pairing with a Bluetooth stereo audio source device that cannot display a list of detected devices or that has no display You may pair the device by setting both this unit and the Bluetooth stereo audio source device to pairing mode. For details, refer to the operating instructions supplied with the device. If pairing is not complete Start over from step 1. Tip To pair with other Bluetooth devices, repeat steps 1 to 5 for each device. Note Passcode of this unit is fixed to "0000. " This unit cannot be paired with a Bluetooth stereo audio source device whose Passcode is not "0000. " Listening to the sound This unit supports SCMS-T content protection. You can enjoy music, etc. , from a device such as a mobile phone or portable TV that supports SCMS-T content protection. Check the following before operating the unit. ­ The Bluetooth stereo audio source device's Bluetooth function is on. ­ Pairing of this unit and the Bluetooth stereo audio source device is complete. ­ If you have been listening to the sound from a source device connected to the INPUT jack, stop playing on the device or turn off the device. 1 2 3 Press the 1 button to turn on this unit. Start the Bluetooth connection from the Bluetooth stereo audio source device. Start playing on the Bluetooth stereo audio source device. Note If the source device has a bass boost function or equalizer function, set them to off. If these functions are on, sound may be distorted. 4 Adjust the volume. Set the volume of the Bluetooth stereo audio source device to moderate level, and press the VOLUME +/­ buttons on this unit. Note A beep sounds when the volume is set to minimum or maximum. Notes · In the following cases, you need to make the Bluetooth connection again. ­ The power of this unit does not turn on. ­ The power of the Bluetooth stereo audio source device does not turn on, or the Bluetooth function is off. ­ The Bluetooth function of this unit or the Bluetooth stereo audio source device is in sleep mode. ­ The Bluetooth connection is not made. · When the sound of a Bluetooth stereo audio device is being reproduced using the Bluetooth connection (when both the power indicator (green) and communication status indicator (blue) light up), the sound from a device connected to the INPUT jack cannot be heard. Terminate Bluetooth connection to listen to the sound of a device connected to the INPUT jack. Continued 11 To finish listening Terminate the Bluetooth connection by any of the operations below. ­ Operate the Bluetooth stereo audio source device to terminate the connection. · If the source device has a bass boost function or equalizer function, set them to off. If these functions are on, sound may be distorted. · If the source device's headphone output has a line switch, better sound will be heard if it is set to on. [. . . ] , Check that the Bluetooth connection is made properly between this unit and the Bluetooth stereo audio source device. , Pair this unit and the Bluetooth stereo audio source device again. Low sound level , Turn up the volume of the source device as high as possible to the extent that sound is not distorted. For details on volume adjustment, refer to the operating instructions supplied with the device. , Turn up the volume of the unit. Sound skips or the correspondence distance is short. , If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources. [. . . ]