User manual SONY SRS-BTM30

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] " This unit cannot be paired with a BLUETOOTH stereo audio source device whose Passcode is not "0000. Listening to the sound ­ If you have been listening to the sound from the source device connected to the INPUT jack, stop playing on the device or turn off the device. Press the 1 button to turn on this unit. If these functions are on, sound may be distorted. Set the volume of the BLUETOOTH stereo audio source device to moderate level, and press the VOLUME +/­ buttons on this unit. In the following cases, you need to make the BLUETOOTH connection again. ­ The power of this unit does not turn on. ­ The power of the BLUETOOTH stereo audio source device does not turn on, or the BLUETOOTH function is off. ­ The BLUETOOTH function of this unit or the BLUETOOTH stereo audio source device is in sleep mode. If both the BLUETOOTH connected device and the one connected to the INPUT jack are played at the same time, both sounds can be heard. Tip You can adjust the volume of this unit with the BLUETOOTH stereo audio source device supporting AVRCP (Audio/Visual Remote Control Profile) Volume UP/DOWN. for details , refer to the operating instructions supplied with the device. Note The volume of this unit may not be controlled as intended depending on the device. Using by Connecting with a Cord You can listen to the sound from a device connected to the INPUT jack. Note For details on how to operate the device to be connected, refer to the operating instructions supplied with the device. The sound may not come through the right speaker. * The above optional accessories are not provided in some areas. Listening to the sound ­ If you have been listening to the sound from the BLUETOOTH stereo audio source device, stop playing on the device or terminate the BLUETOOTH connection. Press the 1 button to turn on this unit. Set the volume of the source device to moderate level, and press the VOLUME +/­ buttons on this unit. Press and hold the 1 button to turn off this unit after using. If connecting the speaker to a device with a built-in radio or tuner, radio broadcasting cannot be received or sensitivity may be reduced significantly. [. . . ] , Turn up the volume of the source device as high as possible to the extent that sound is not distorted. , Replace all the batteries with new ones, if they are used with this system. Sound skips or the correspondence distance is short. , If a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move away from such sources. [. . . ]