User manual SONY SRS-BTV5 MARKETING SPECIFICATIONS (WHITE MODEL)

[. . . ] ●When sending images on a mobile network, high packet communication fees may be incurred depending on the details of your contract. ●Do not remove the memory card or battery or move to an area without any reception while sending images. ●“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance. [. . . ] You can play back the picture on the smartphone/tablet, or save and edit it on PC. [New Connection]: Configure settings for a new Wi-Fi connection with Wi-Fi compatible devices or WEB services. ([Remote Shooting] / [Playback on TV] / [Send Images While Recording] / [Send Images Stored in the Camera]) [History Connection]: Connect to compatible devices or WEB services using the same setting as before when connecting with Wi-Fi. [Favorite Connection]: You can register frequently used connection settings. [Wi-Fi Setup]: Configure various Wi-Fi settings. [Send Images While Recording] You can select and send recorded images. Electromagnetic waves from the camera can affect instruments and meters. In airplane cabins or in other restricted areas, set [Airplane Mode] to [ON]. Press [MENU/SET] Press to select [Setup] and press [MENU/SET] Press to select [Airplane Mode] and press [MENU/SET] Press to select [ON] and press [MENU/SET] 3 Connect to Wi-Fi Camera Smartphone/ tablet Camera Wireless access point Compatible devices, etc. , on network Camera Wi-Fi compatible devices [Remote Shooting] (see below) [Via Network] (see reverse side) [Direct] (see reverse side) [Send Images Stored in the Camera] Recording/viewing pictures with a smartphone/tablet [Remote Shooting] This section describes how to make a Wi-Fi connection between this unit and a smartphone/tablet to record pictures using the smartphone/tablet and to transfer pictures to the smartphone/tablet. 2 Easily connect to a smartphone/tablet When manually connecting without the NFC function 1 Installing “Panasonic Image App” The “Panasonic Image App” is an application provided by Panasonic that allows your smartphone/tablet to perform the following operations of a Wi-Fi-compatible LUMIX. (“Panasonic Image App” is indicated as “Image App” in the text. ) ■ Version 1. 2 or above Use the NFC (Near Field Communication) function to easily connect this unit to a smartphone/tablet with Wi-Fi for remote recording and to send pictures to the smartphone/tablet. • This function can be used with NFC compatible devices with Android (2. 3. 3 or above). Press to select [WPS (PIN code)] and press [MENU/SET] Enter the PIN code of the device into this unit 4 Press to select connection method, and then press [MENU/SET] [Via Network]: When you want to connect to your TV via an wireless access point. [Direct]: When you want to directly connect this unit to the device you are using as a wireless access point. ■ Windows Insert the disc Click [Applications] Click [Recommended Installation] or [LUMIX Map Tool] Continue the installation procedure following the instructions displayed on the screen. [WPS (PIN code)] ■ Mac Insert the disc Double-click the recognised disc to open Double-click the [Application] folder to open Double-click the [MAPTOOL] folder to open Double-click [LUMIX Map Tool. pkg] Continue the installation procedure following the instructions displayed on the screen. 5 Press Enter the SSID and password into the device. The SSID and password are displayed on the connection waiting screen of this unit. to select a device you want to connect, and then press [MENU/SET] 6 Take or play back pictures on this unit ●DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. [Manual Connection] When sending images to PC You can select and send recorded images. Prepare folders for receiving images on the PC before sending a picture to the PC. Copying detailed maps to a memory card Since the map data size is large, be sure to check the free space on the memory card before copying the data. (A memory card of at least 8 GB is needed to copy the map data for all the regions. ) • When a memory card is formatted (initialised), all data, including the map data, is deleted. Preparation: Insert the supplied disc in your computer drive before starting the copying procedure. Insert the memory card into a card reader/writer (commercially available) Start “LUMIX Map Tool” installed in your computer Windows: Click [Start] → [All Programs] → [Panasonic] → [LUMIX Map Tool] → [LUMIX Map Tool] Mac: Double-click [LUMIX_Map_Tool] in [Applications] (Applications) Select a card from the pull-down menu Click the checkbox to select a region to be copied Click [Execute] Perform the rest of the steps in accordance with the instructions displayed on the computer screen. After copying is finished, click [Close] and remove the memory card from the computer 1 To create a folder that receives images 2 Connecting to your PC • Create a PC user account (account name (up to 254 characters) and password (up to 32 characters)) consisting of alphanumeric characters. [. . . ] An attempt to create a receive folder may fail if the account includes non-alphanumeric characters. • Turn the computer on. • If the standard settings are changed for the workgroup on the connected PC, you must change settings in [PC Connection] on this unit. ■When using “PHOTOfunSTUDIO” 1 Press [Wi-Fi] button 2 Press 3 Press 4 Press 5 Press to select [New Connection] and press [MENU/SET] • You can also select it by touch operations. to select the folder you want to send, 7 Press and then press [MENU/SET] 1 Install “PHOTOfunSTUDIO” to the PC “PHOTOfunSTUDIO” 8 Press • For details on hardware requirements and installation, read “Operating Instructions for advanced features”. to select [SINGLE] or [MULTI], and then press [MENU/SET] 2 Create a folder that receives images with • To create the folder automatically, select [Auto-create]. To specify a folder, create a new folder, or set a password to the folder, select [Create manually]. [. . . ]