User manual SONY SRS-BTX500

[. . . ] 4-457-524-21(1) Tip  When the system is turned on first time, the Bluetooth indicator (blue) starts flashing quickly. Tips VOLUME −/+ buttons SOUND button/ indicator Personal Audio System Operating Instructions Mode d’emploi  If it is difficult to establish the connection, try the following. € Activate the app “NFC Easy Connect” and move the smartphone slightly on the N marked part of the system. – If the smartphone is in a case , remove it. [. . . ] If the Bluetooth indicator (blue) is not flashing quickly, press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard. 2 Start playback on the Bluetooth mobile phone, then adjust the volume. Set the volume of the Bluetooth mobile phone to a moderate level, and press the VOLUME –/+ buttons on the system. Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. Bluetooth wireless technology operates within a range of about 10 m. Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time. You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket. Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide. Auto power off To call Operate the Bluetooth mobile phone. Check that a dialing tone is heard on the system and talk using the microphone. If no dialing tone is heard, press the (call) button on the system for about 2 seconds to change the call device to the system. The system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played. install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. [. . . ] Note also that even if the same profile exists, devices may vary in function depending on their specifications. Ώ Due to the characteristic of Bluetooth wireless technology, the sound played on the system is slightly delayed from the sound played on the Bluetooth device during talking on the telephone or listening to the music. Ώ This system supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. [. . . ]