User manual SONY SRS-D4K
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY SRS-D4K. We hope that this SONY SRS-D4K user guide will be useful to you.
Lastmanuals help download the user guide SONY SRS-D4K.
Manual abstract: user guide SONY SRS-D4K
Detailed instructions for use are in the User's Guide.
[. . . ] They can scratch the surface of the panel and/or cause the indicator letters to peel off.
To prevent battery rise
When the unit is used in the ACC ON position without turning the engine ON, it depletes the battery. Use it after starting the engine.
2CAUTION
To prevent damage to the machine, take the following precautions:
Protection function
There is a Protection function installed in the unit to protect the unit and speakers from various problems. When Protection operates, the display informs you of the condition. Display "E-01" Informations When the inside of the unit is overheating. [. . . ] · If the fuse blows, check wires for shorts, then replace the fuse with one of the same rating. · Check that no unconnected wires or connectors are touching the car body. Do not remove caps from unconnected wires or connectors to prevent short circuits. · Connect the speaker wires to appropriate speaker connectors separately. Sharing the negative wire of the speaker or grounding speaker wires to the metal body of the car can cause this unit to fail. · After installation, check that the brake lamps, winkers, and wipers work properly.
Power control wire
Left input
Right input
Lead terminal* Right speaker Left speaker
Speaker (Bridged)
Controls
KAC-X521/ KAC-PS521
KAC-X621/ SRS-D4K
1 Fuse (KAC-X621/PS621 : 25 A × 3 , KAC-X521/PS521 : 30 A × 2) 2 Battery terminal 3 Ground terminal 4 Power control terminal
Controls the unit ON/OFF.
NOTE
# Power indicator
Lights when the POWER switch is turned On. The indicator flashes several seconds when the POWER switch is turned On or when the Protection function is activated.
$ LPF FREQUENCY control
Sets the cutoff frequency when the "FILTER" switch is set to "LPF". Sets the cutoff frequency when the "FILTER" switch is set to "HPF".
Controls the unit power. Be sure to connect it with all the systems.
% HPF FREQUENCY control ^ FILTER switch
5 Speaker output terminals · Stereo Connections:
When you wish to use the unit as a stereo amplifier, stereo connections are used. The speakers to be connected should have an impedance of 2 or greater. When multiple speakers are to be connected, ensure that the combined impedance is 2 or greater for each channel. The setup items and set values are switched as follows. Display Range "VOLT"/"CURR"/"TEMP"/"FAN" "BASS" 60/80/100/200 (Hz) "BA G" B15 -- B+15 (dB) "BA Q" Q1. 00/Q1. 25/Q1. 50/Q2. 00 " EXT" "TREB" "TR G" "VOL" "TEMP" "DEFA" "AMP" ON/OFF 10/12/15/17 (kHz) T15 -- T+15 (dB) 20 -- 0 (dB) FAHR (Fahrenheit) or CELS (Centigrade) 0--7 Adjustment Item For the operation method refer to 'Display mode' Bass Center Frequency Bass level Bass Q Factor When the bass extend is set to ON, low frequency response is extended by 20%. Treble Center Frequency Treble level Volume offset The Fahrenheit or Centigrade temperature unit can be selected for the Display mode. For the operation method refer to 'Default' The ID Number you have assigned is displayed.
Canceling the Demonstration mode Press any button to cancel the Demonstration mode.
6
English
Control an Amp from Center Unit
You can control the sound by controlling amplifiers from the Center Unit.
Messages that may be displayed on the Center Unit
When you are selecting an item with the Amp Control, an error status of the amplifier is displayed on the Center Unit. Display Informations "AMP × E-01"/"AMP × COND E-01" When the inside of the unit is overheating. When the unit has failed and direct current voltage is generated to the speaker's output. "AMP × E-02"/"AMP × COND E-02"
NOTE
1 Enter AMP Control mode
Select the AMP Control mode by following the 'AMP Control' procedure given on the Operation Manual of the Center Unit.
NOTE
Use the set item and value operation buttons by following the instructions given on the Operation Manual of the Center Unit.
2 Select an amp number to operate
Operate the desired set item with the Center Unit. Select the "AMP NO"/"AMP CONTROL NO" display.
NOTE
Turn the POWER switch Off and release the protection. If the error message continues, consult to the SONY's dealership. "AMP × E-03"/"AMP × COND E-03" "AMP OFF"
NOTE
When the Center Unit is in the STANDBY mode, message "AMP OFF" is displayed and you cannot operate the set items.
When the speaker cord is shorted. When the speaker output is in contact with the vehicle ground. [. . . ] · Release the AMP Control mode of the Center Unit. · Always set the ID number of the Master amplifier to "0". · After you have changed the ID number of an amplifier, turn Off the POWER switch of the Center Unit first, then turn it On again.
· The AMP Control of the Center Unit is being used. · An incorrect ID number is used for the Master amplifier. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY SRS-D4K
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY SRS-D4K will begin.
