User manual SONY SRS-D5

[. . . ] Should you notice an abnormality in the system, disconnect the main plug from the AC outlet immediately. The system is not disconnected from the mains as long as it is connected to the AC outlet, even if the system itself has been turned off. Use only the supplied AC power adaptor. To avoid damaging the system do not use any other AC power adaptor. [. . . ] Be sure to lower the volume of the source device (PC, etc) and turn off the system when removing the input cable from the source device. Turn up the volume of the source device as high as possible before the onset of distortion. Ensure that your PC sound balance is set to the center. Disconnect the connecting cord with stereo mini plug from the system and the PC or source device; then, firmly reconnect the connecting cord to the system and the headphone jack (stereo mini jack) of the PC or source device. Turn down the volume of the source device to the point where the sound is no longer distorted. There is hum or noise in the system output. Make sure no audio devices are positioned too close to the TV set. The brightness of the power indicator may become unstable when the volume is turned up. The sound comes through only one satellite speaker. If connecting the system to the monaural jack of a source device, the sound may come through only one satellite speaker. Listening to the sound First, turn down the volume on this system. When connecting the system to the headphones output, turn down the volume of the source device. To wall outlet vers la prise murale a la toma de pared an Netzsteckdose AC power cord (supplied) Cordon d'alimentation secteur (fourni) Cable de alimentación de ca (suministrado) Netzkabel (mitgeliefert) AC power adaptor (supplied) Adaptateur secteur (fourni) Adaptador de alimentación de ca (suministrado) Netzteil (mitgeliefert) The nameplate is located on the bottom exterior of the left speaker. Before operating the system, be sure that the operating voltage of the system is identical to that of your local power supply. Turn the BASS control on the left speaker to adjust the bass volume. If these functions are on, sound may be distorted. if headphones/earphones are connected , the bass control function is canceled. Although this system is designed to be used with a PC or a portable audio device, if the system volume and the bass volume is high, depending on the volume setting, the operating software, and the devices being connected, the speaker sound may be paused. This is caused by the protection circuit, and it's not a malfunction. Turn down the volume and the bass volume during use. [. . . ] In the case of a personal computer, take appropriate measures such as data storage before turning off. if no improvement is apparent , locate the system farther away from the TV set/personal computer. Furthermore, be sure not to place objects in which magnets are attached or used, such as audio racks, TV stands, toys, etc. These may cause magnetic distortion to the picture due to magnetic interaction. [. . . ]